Official Battery Box for micro:bit, with switch, for 2x AAA batteries  Features Battery Box for two AAA batteries (not included)  JST connector compatible with all versions of Micro:Bit Convenient on/off switch Dimensions: 59mm x 25...

Develop your coding skills with the Kitronik ARCADE for BBC micro:bit and MakeCode Arcade, a fully featured programmable gamepad for use with the MakeCode Arcade block editor. The Kitronik ARCADE for BBC micro:bit and MakeCode Arcade is a handheld...

Octopus micro bit Light Sensor Brick can read the light value of the current environment. CHARACTERISTICS The 3-pin ports are easy to plug and play with. It can work with micro:bit in 3V. OUTLOOK &...

ELECFREAKS 360 Digital Servo With Wheel And Tire (EF90D) with wheel and tire is a kind of 360 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and uses pulse width to adjust the speed of the servo...

Design and build your own battery-less buggy with this pull-back motor, axles, and wheels kit. Design your own chassis, add this kit, pull it backwards, let go, and let the elastic potential energy stored in the spring inside the motor propel your buggy...

Official micro:bit branded USB cables that allow you to power and transfer data to your micro:bit. High quality construction with PVC cable sleeve and embossed logos. USB 2.0 data transfer rates up to 480Mb/s USB A Plug to USB Micro B Plug 0.3m...

Official micro:bit branded USB cables that allow you to power and transfer data to your micro:bit. High quality construction with PVC cable sleeve and embossed logos. USB 2.0 data transfer rates up to 480Mb/s USB A Plug to USB Micro B Plug 0.3m...

Plug a servo meter with 5.4mm (0.1 inch) header socket in, and connect croc/alligator clips to the rings, so that you can easily connect a servomotor to a ring-based microcontroller, such as the BBC micro:bit, Adafruit Circuit Playground Express or...

Pinbetween gives you access to all of the micro:bit's pins at the same time as using an edge-connector add-on, and it's completely solderless! The 40-pin male header on Pinbetween lets you use jumper jerky to connect extra bits to your micro:bit while...

These ELECFREAKS IIC OLED Module are small, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own...

Unlock the secrets of nature with code, engineering, and the Environmental Control Board for micro:bit! The Kitronik environmental control board provides a variety of sensor inputs and connection points for the BBC micro:bit (V1 & V2) and provides...

Take your robotics project to the next level with the Kitronik compact 16 servo driver board for the BBC micro:bit. This board allows up to 16 Remote Control (RC) servos to be driven simultaneously. It is based on the PCA9685 driver IC. The board...

Monitor and analyse the air you breathe with the Kitronik Air Quality Board. Great for home and the classroom. The Kitronik Air Quality Board provides a complete air monitoring and reporting solution for the BBC micro:bit. The wealth of onboard sensors...

The Terminal Breakout board for the BBC microbit does exactly what it says on the tin. It breaks out all of the signal and power pins on the microbit to user friendly terminal blocks. No more untangling M/M or M/F jumper cables from the hastily tidied...

The JST Version Klip Halo V2.0 board for the BBC micro:bit breaks out each of the 19 GPIO pins from the BBC micro:bit, with easily accessible, clearly marked connection points compatible with both crocodile clips and 4mm banana plugs. The edge connector...

The Prong soil moisture sensor for BBC microbit is a sensor board that can be directly mounted to a BBC micro:bit to monitor the moisture present in the soil. The two conductive tines are placed into the soil. Any water or moisture in the soil will...

The LAMP:bit features connections which allow the microbit to be bolted/clipped directly to it. It has been designed to replicate a streetlight, in form and function. This is a great board for use in transportation projects and has been designed to fit...

This is the perfect cable choice for those that want to output music or general sound for the BBC micro:bit, to either headphones or speakers. At one end of the cable are the black and red crocodile clips, which connect to the microbits GND and Pin 0...

Please Note: BBC micro:bit, 2 x AAA Battery Cage and 2 x AAA Batteries are NOT included This Prototyping System for the BBC micro:bit is a great way to start making circuits and making experiments without the need to solder. This prototyping system...

Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digital, analog, and I2C/Uart interfaces...