Raspberry Pi in Canada - Authorized Canadian Reseller

* Raspberry Pi

Sub Categories

Raspberry Pi HATs and Add-On Boards

Raspberry Pi Prototyping & GPIO

Raspberry Pi Screens and Displays

MicroUSB Power Adapter 5V, 3A - International Plugs

$12.95

Specs: Plug Type: Aus, Euro, US Input Voltage AC: 100V - 240V Output Voltage Nom. 5V Output Current Max: 3A Power Supply Output Type: Fixed Output Connector: USB Micro Cable Length : 45 inch

Add to Cart

Allows two HAT or pHAT (or a mix) to be attached to a single Raspberry Pi 40 way connector. All pins are connected *except* ID_SD and ID_SC (HAT EEPROM) which have solder jumpers - this allows HAT which follow the specification correctly to operate...

Notify Me

Camera Cable Joiner/Extender for Raspberry Pi

$4.75

The Raspberry Pi camera module comes with its own 30cm cable to connect to the Pi, but sometimes that's simply not long enough. This lovely little board lets you add extension cables to your existing camera cable, giving you as much range as you'll...

Add to Cart

Cluster HAT v2.5

$51.95

USA customers: this product is also available at our USA store - PiShop.us The Cluster HAT is also available in a Cluster Kit (comes with 4 Raspberry Pi Zero W) The cluster HAT is physically compatible with the Raspberry Pi Zero 2, but the Zero 2 can...

Add to Cart

SD Card Imaging with Custom Software

$1.95

Need to deploy a lot of Pis? We can image SD cards for you and save you time (and possibly troubleshooting efforts). We use high quality card duplicators and perform low-level block by block cloning to ensure accurate, bootable images. Note that...

Add to Cart

Brass 12mm Standoff Set for Pi HATs - Pack of 4

$1.95

We tried several standoff kits before we chose this high quality set as our go-to. The metal hardware threads together cleanly, and the tall standoffs and nuts can be easily attached with your fingers, and then optionally tightened with tools. This 12mm...

Add to Cart

PUD HAT (Pull-Up/Down Resistor HAT)

$11.95 $13.95

Whether you're pulling-up or pulling-down, there's no need to frown! With the PUD HAT from ModMyPi, adding multiple pull-up or pull-down resistors to your Raspberry Pi project is easy! The PUD HAT is an expanded version of the smaller PUD board...

Notify Me

Triple GPIO Expansion Board w/ HAT Area

$11.95

This triple GPIO multiplexing expansion plate is perfect for sharing GPIO pins between applications and circuits! It's often fiddly to combine multiple breakout boards onto the standard single Pi GPIO header, but with the expansion plate, it's a breeze...

Notify Me

ModMyPi MCP23017 pHAT - 16 Channel I/O Expansion (Zero)

$14.95

The MCP23017 pHAT from ModMyPi and BuyaPi.ca is the perfect I/O expansion pHAT for your Raspberry Pi Zero. The pHAT features a single removable MCP23017 DIP IC, which utilise two i2c pins (which can be shared with other devices if...

Add to Cart

Pi Zero USB Stem

$7.95

The Zero Stem is a PCB shim that turns a Raspberry Pi Zero into a USB dongle. Once the shim is installed, your Raspberry Pi can be plugged directly into a computer or USB hub without any additional cables or power supplies. The Zero Stem is compatible...

Add to Cart

Raspberry Pi Zero Wireless WH (Pre-Soldered Header)

$22.45

No fiddly soldering required! Jump straight into your project with this Raspberry Pi Zero Wireless with a lovingly pre-soldered 40 Pin Male GPIO Header! The Brand New Raspberry Pi Zero Wireless has landed at BuyaPi.ca! The...

Choose Options

Adafruit Pi Protector for Raspberry Pi Model Zero

$7.95

Now that we're carrying the Pi Zero, PaintYourDragon is back with another gorgeous laser-cut masterpiece. This time he's taken a pass at a Pi Protector for Raspberry Pi Zero, not quite a full case, it will keep your Pi Zero safe and svelte...

Add to Cart

PiJuice Solar Panel - 40 Watt

$245.95

The PiJuice 40 Watt Solar panel is the ideal way to charge and/or power your PiJuice HAT and Raspberry Pi for free when you’re in a sunny location. By using a solar panel and PiJuice, containing our revolutionary PiAnywhere technology,...

Add to Cart

Pi-BB-RPS, Bread Board With Redundant Power for Pi

$48.95

Pi-BB-RPS provides Redundant Power Supply capability. Second power is the micro-USB power. Power is switched seamlessly between these two sources. Priority is given to power source with higher power Voltage. DC 5V and 3.3V is generated on the board. The...

Add to Cart

Pi-BB Bread Board for Raspberry Pi

$36.95

Pi-BB is a powered half-size breadboard ideal for Raspberry PiÂ„¢, and compatible with Arduino & other development boards. Use with a Raspberry Pi or standalone for prototyping work. 300 connection points make it convenient to attach any...

Add to Cart

PiZ-UpTime 2.0 UPS Board for Raspberry Pi Zero/W

$54.95

A Raspberry Pi Zero and Pi Zero W (abbreviated here as PiZ) is a small size computer tethered to the wall power outlet. It needs the power via the micro-USB cable to operate. When PiZ needs to be moved from one location...

Add to Cart

Pi-UpTime 2.0 UPS Board for Raspberry Pi

$75.95

Pi-UpTime UPS 2.0 is a new and improved version of the Pi-UpTime UPS. (See a comparison chart between the original and the updated version 2.0) The Pi-UpTime UPS 2.0 is designed to work with the Pi-4 or other SBC’s, such as Odroid, Asus,...

Add to Cart

PiZ-EzConnect HAT Kit for Pi Zero

$28.45

PiZ-EzConnect KIT allows you to customize and build your own GPIO connector for a Raspberry Pi or a Pi-clone (e.g. Asus Tinker, PiOrange etc.) All 40 pins used by the Raspberry Pi are exposed. Soldering is required. KIT includes...

Add to Cart

PiZ-EzConnect Terminal Block HAT for Pi Zero

$28.95

PiZ-EzConnect allows connection to any Raspberry Pi header pins via a terminal block. Like the Pi-EzConnect board, PiZ-EzConnect conforms to the Pi Zero dimensions, making this a nice, compact, easy to use and connect...

Add to Cart

Brass Standoffs, M2.5 x 15mm, Package of 4

$2.45

Brass standoff kits ideal for Raspberry Pi, Arduino, and other electronics. These are ideal for Alchemy Power products such as Pi-EzConnect, Pi-16ADC, Pi-BB, and Pi-UpTime. Contents Four brass M2.5 15mm x 6mm hex standoffs Four brass M2.5mm...

Add to Cart