Arduino Epoch
| SKU: | 955-1 |
Package content
- 1x Epoch Learning Center Circuit Board (Completely populated with everything seen in the introduction video below)
- 1x 1602 LCD
- 1x RFID MFRC522 reader module
- 6x RFID cards
- 2x NRF24L01+ trancievers
- 1x HC-01 Bluetooth module
- 1x HC-SR04 Ultrasonic range finder module
- 1x PIR motion sensor
- 20x Male to Female cable connectors
- 20x Female to female cable connectors
- 1x AC-DC Power supply (9v)
- 21x M3 screws
- 13x 12mm stand-offs
- 1x PS2-USB Keyboard adaptor
- 1x USB cable
- 1x NRF24L01+ Arduino shield
- 1x 16-digit matrix keypad attachment
- 1x Stereo cable
- 1x Servo motor kit
Getting Started
- You'll need to download the CH340G drivers from github in order for your computer to communicate with the Epoch. Find it here: github.com/HobbyComponents/CH340-Drivers
- Download Arduino IDE here: www.arduino.cc/en/software
- ​Watch the above video! The most important details lay within!
- When you're not using your Epoch, power it off unless you're data logging. This is to protect the board from brown-outs.
- If you are using the AC-DC wall adaptor to power the Epoch as opposed to USB, make sure you use a surge protector/UPS.