Bluetooth Caterpillar Vehicles Track Car For Arduino UNO Android

This is a DIY kit. It comes with NO documentation/manual. It's relatively simple to assemble but we decided to put it on a clearance sale to compensate for the extra challenge of building without instructions:)

Arduino UNO Main technical parameters:
1. 14 digital input/output port TX and RX, D2 ~ D13,
2. 8 analog input port A0 ~ A7
3. one TTL level serial transceiver port RX/TX
4. 6 PWM ports, D3, D5, D6, D9, D10, D11
5. Using Atmel Atmega328P and ATMEGA8U2 micro-controller
6. frequency 16MHZ
7. Support the USB download and power supply
8. Support external 7-12v dc power supply
9. Support 9v batteries
10. Support ISP download
11. Three kinds of power supply mode: USB, VIN, an external 5v input

ARDUINO L298 shields
1. A L298P motor driver chip on the board, directly references the mainboard digital IO port,
2. Onboard a buzzer, can set astern alarm bell.
3. Convenient motor interface, can be divided into two motor output
4. Two bluetooth interface, can be directly plugged into
5. D2, D3, D5, D6, D7, D9, D13 seven digital interface without being used
6. A0 - A5 six analog interface
7. Going back to have light

Package list:
1. ARDUINO track vehicle x1
2. ARDUINO UNO board x1
3. ARDUINO 298 extension board x1
4. Bluetooth module x1
5. 18650 battery box x1
6. 18650 charger x1
7. 3w LED module x1
8. RGB leds x2
9. Dupont line x20
10. Organic glass 3mm x1
11. Copper column x4
12. Screw x10
13. Nut x10
14. USB cable x1

Batteries are not included