Creality LD-002R UV Resin LCD 3D Printer

This product is only available for shipping within Canada, and will ship with Canada Post Expedited Parcel service. A separate shipping fee of $25 applies to this item

This printer requires UV-curing resin, which is not included.

See spare parts for Creality Printers here.

BUILD AND MOTION: Great emphasis is being placed on the LD-002R’s robust build quality and the components of its motion system, which is underpinned by a ball screw and single linear rail for the Z-axis.

ANTI-ALIASING: MSLA 3D printers use an LCD screen to mask an image of a layer over a UV light source. Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface. Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out.

QUICK LEVELING: Quick leveling in the sense that the machine will lower the print plate to the vat for you, yes the LD-002R is quick leveling. Four hex screws feature on the print plate — loosen them before dropping the plate, and it will align to the level of the screen. Tighten and you’re good to go. Standard MSLA fare.

PERFORATED PRINT PLATE: Something of an oddity on a small desktop MSLA machine, the Creality LD-002R 3d printer has a perforated print plate. Typically seen on larger bottom-up machines where larger prints present additional pull that might dislodge an improperly adhered print, it’s unusual, and perhaps even distracting overkill, to see it on a smaller machine. It’s not a bad thing, but it makes you wonder why they did it.

AIR FILTER: A small box at the rear of the print chamber contains a pouch of activated carbon. This should help to remove part of the stench of exposed resin from the air.

Parameter

What is OctoPi?

If you are looking for a better way to send prints to your 3D printer then look no further than OctoPi.

OctoPi is a Raspbian SD Card Image for the Raspberry Pi that already includes OctoPrint plus everything you need to run it. OctoPi allows you to remotely manage your printer, send gcode, monitor your printer during prints and even create beautiful time lapses.

There are also many OctoPi plugins that extend the functionality and allow you to do things like AI Monitoring of your prints, or sending status information over your favourite messenger.

Setup is quick and easy, and OctoPi supports Creality Printers out of the box.

To get started with OctoPi here is what you need.

• Raspberry Pi Budget Kit or Raspberry Pi 4B
• HighPi Raspberry Pi Case
• Power Supply (Minimum 5V, 1.2+A )

And

• Connection USB cable (Mini-USB for the original and Pro; Micro-USB for the V2)
• MicroSD Card with OctoPi imaged
• Raspberry Pi Camera
• Long Ribbon