More than just Stereo – the HiFiBerry DAC8x
The HiFiBerry DAC8x is a high-resolution digital-to-analog converter for the Raspberry Pi 5. This is a special sound card for the Raspberry Pi, optimized for one specific use case: affordable high-quality audio playback.
DAC8x offer 8 channel of high-quality audio output up to 192kHz sample rate.
Compatibility: The DAC8x is ONLY compatible with the Raspberry Pi5.
Features
- 8 channel sound output
- Four dedicated 192kHz/24bit high-quality Burr-Brown DACs
- Connects directly to the Raspberry Pi, no additional cables needed
- No soldering, comes as a pre-fabricated kit. You just plug it onto the Raspberry Pi
- Compatible with all Raspberry Pi 5
- Directly powered from the Raspberry Pi, no additional power supply
- Two ultra-low-noise linear voltage regulators for optimal audio performance
- HAT compliant, EEPROM for automatic configuration
- Comes with all components required to mount it. We include 4 M2.5x12mm spacers to fix the board onto the Raspberry Pi
Specifications
| Maximum output voltage | 2.1Vrms | |
| DAC signal-to-noise ratio | 112db | typical |
| DAC THD+N | -93db | typical |
| Frequency response | 10Hz-70kHz | -3dB |
| Power consumption | <0.3W | |
| Sample rates | 44.1-192kHz |
- Dimensions: 5.5 × 6.5 × 2.5 cm
- Weight: 30 g
Configuration
Overlay for config.txt:dtoverlay=hifiberry-dac8x