Metal Case supporting Raspberry Pi 5 + HAT - ED-Pi5Case-EXT
- Sheet metal powder spraying + aluminium profile technology, simple design
- Both top and bottom case provide passive cooling for Raspberry Pi 5 though thermal pads & metal body, excellent cooling performance
- Good protection for Raspberry Pi 5, Raspberry Pi Active Cooler and Raspberry Pi M.2 HAT+
- Support installation of Raspberry Pi 5 + Raspberry Pi M.2 HAT+
- Support installation of Raspberry Pi Active Cooler
- HDMI, Ethernet port, USB, SD card, ON/OFF button and PWR/ACT indicator are all accessible
- Reserved camera cable slots and mounting holes for installing the Raspberry Pi Camera on the case
- All-metal casing with an attractive appearance for commercial and industrial scenarios
Specification
| Cooling Performance | ||
|
Test Device Configuration
|
Raspberry Pi 5 + Raspberry Pi AI Kit + Raspberry Pi Active Cooler
|
Raspberry Pi 5 + Raspberry Pi AI Kit + Raspberry Pi Active Cooler + ED-Pi5Case-EXT
|
| Software Configuration |
|
|
| Ambient Temperature | 25℃ | |
|
Hailo*1 Module stable
operating temperature (℃) |
93.1 | 73.3 |
|
Stable running temperature
of CPU (℃)
|
65.1 | 65.1 |
|
*1: Hailo module is an operation module located on Raspberry Pi AI kit.
Test Results: Under the environment of 25℃, when the device is running in a stable state, ED-Pi5Case-EXT can reduce the temperature of Raspberry Pi AI Kit by about 20℃, and also reduce the temperature fluctuation range of Raspberry Pi 5 CPU.
|
||
| Mechanical Characteristics | ||
|
Dimensions
|
91mm x 61mm x 33mm | |
| Material | Sheet Metal (Top Cover) + Aluminium Profile (Bottom Cover) | |
Note:
- Raspberry Pi 5, Raspberry Pi Active Cooler, Raspberry Pi M.2 HAT+, Raspberry Pi Camera Module 3 and SD card are not included in the box, the following is intended as an installation illustration only.
- Before you start installing, please remove the White Protective Paper from thermal silicone in the case.
- If the Raspberry Pi AI Kit is installed, please make sure that the thermally conductive silicone in the Top Cover is in full contact with the Hailo IC.
- You can log in to Raspberry Pi website (https://www.raspberrypi.com) to get assembly instructions of Raspberry Pi Active Cooler, Raspberry Pi M.2 HAT+ and Raspberry Pi Camera Module 3
Dimensions
