NAS Multi-functional Mini-Computer Designed for CM4, Network Storage, Dual Solid State Drive slots
(No reviews yet)
Write a Review
| Brand | Waveshare |
| SKU: | 1512-1 |
Waveshare 24678 - NAS Multi-Functional Mini-Computer Designed For Raspberry Pi Compute Module 4 (NOT Included), Network Storage, Dual Solid State Drive Slots, Dual Gigabit Ethernet Ports, 4G Network, Metal Case - CM4-NVME-NAS-BOX
Features
- All-in-one Mini-Computer, mainly designed for home, small home office, etc.
- Provides a simple and easy-to-use solution, no expert knowledge of networking and storage systems required
- Onboard 2× M.2 M KEY slots for installing NVME Solid State Drives
- Onboard MINI PCIE connector for installing 4G module
- 2× HDMI 4K output interfaces
- Onboard USB3.2 ports, IR receiver, RTC, dual Gigabit Ethernet connectors, 3.5mm jack, etc.
- Precise cut-out with clear label. Each cut-out is completely aligned with the connector.
Specifications
| CM4 socket | Suitable for all variants of Compute Module 4 |
|---|---|
| NETWORKING | Gigabit Ethernet RJ45 connector × 2 (Original Network port ETH0, and PCIE extended Network port ETH1) |
| MINI PCIE connector, supports 4G module (USB protocol, can not support PCIE protocol) | |
| Nano-SIM card slot, supports standard Nano-SIM card for 4G/3G/2G Internet access | |
| M.2 | Dual NVME Solid State Drives slots (compatible with 2230, 2242, 2260, 2280) |
| USB | USB 3.2 Gen1 (5Gbps) port× 2 |
| CSI camera | MIPI CSI-2 camera port × 2, 15pin 1.0mm FPC connector |
| HDMI | HDMI × 2, supports 4K 30fps output |
| Audio | 3.5mm earphone/mic jack |
| RTC | Real-time clock with battery socket and ability to wake Compute Module 4 |
| TF card slot | TF card socket for Compute Module 4 Lite (without eMMC) variants |
| Power input | Type-C (5V 4A) |
| Dimensions | 128 × 122 × 36mm |
Includes
- CM4-NVME-NAS-BASE x1
- Metal case (top and bottom) x1
- Momentary push button switch ~12mm (with LED and four pre-wired cables) x1
- 30×40mm Silicone thermal tape x1
- 15×15mm Silicone thermal tape (2PCS) x1
- 7×7mm Silicone thermal tape (2PCS) x1
- Antenna connector rubber plug (2PCS) x1
- Screws pack x1
Weight: 0.551 kg
Installation Instruction
* for reference only, the CM4 is NOT included.
Outline Dimensions
Resources
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.