Quadruplicate your GPIO pins and attach up to four add-ons to a single Raspberry Pi Pico with our formidable Pico Decker expander board!
A Raspberry Pi Pico is NOT included
Struggling to choose between Pico add-ons? Mix and match up an epic stack of functionality and plug in up to four Pico Packs or Bases at once*, or use the four sets of fully labelled male GPIO pins to easily attach other devices, jumper wires or circuitry - very useful for prototyping. We've also included some little rubber feet to keep everything solid, four M2.5 mounting holes and some particularly whimsical Routemaster bus inspired artwork on the back.
Features
- One landing area with labelled female headers for attaching to your Pico.
- Four landing areas with labelled (mirrored) male headers for attaching add-ons.
- 4x M2.5 mounting holes.
- 4x rubber feet
- Compatible with Raspberry Pi Pico.
- 99% assembled - just need to stick on the feet!
- No soldering required.
- Dimensions: approx 148mm x 52mm x 13mm (L x W x H, including feet and headers)
Notes
- * You'll need to check for data pin conflicts when using multiple Pico add-ons - the shop page for the add-on in question will list what pins it uses.
- * If you need to plumb a Pico Base into Pico Decker, you'll probably want to do it via some male-female jumper jerky to keep things manageable and to stop everything from being quite so upside-down!
- The Pico Packs shown in the photo are not included.