Printrboard Rev F6 - USB B Connector

The Rev F6 Printrboard with USB B Connector features a push-push microSD card socket for increased ease of use for printing via SD card.  We have also added an additional fan ports for independent control of cooling your hot end and the print.

The Rev F6 Printrboard is compatible with all current Printrbot models.  However, the USB B connector is considerably larger than the microUSB connector that been used on previous revs of Printrboard.  You will have to €œhack€ a larger connection hole into the base of your Printrbot Simple or Plus.  Play users, you have the option to reverse the orientation of the Printrboard, but it will affect accessibility to the USB and SD sockets.  See product photo gallery for examples.

If you are in need of a Printrboard with a microUSB connector, click here.

All Rev F boards are identical in terms of components, but you can select a board that is pre-loaded with the correct firmware and setting values for your Printrbot. *Maker Kit users, select €œPlay 1505€.

Technical Specifications:

• Rev F6
• USB B connector
  • NOTE: USB B connector is considerably larger than the microUSB connector that been used on previous revs of Printrboard. You will have to €œhack€ a larger connection hole into the base of your Printrbot Simple or Plus.  Play users, you have the option to reverse the orientation of the Printrboard, but it will affect accessibility to the USB and SD sockets.  See product photo gallery for examples.
• Push-push microSD card socket
• Independent fan ports - Control your print fan and hot end fan separately.
• 6-pin power connector (6 Pin Power Harness NOT included.  Order separately here)
• Digital potentiometers
• Screw terminal for heated bed connection
• Does not ship with EXP1, EXP2, I2C, or ICSP pins, previously on the F5.

Compatibility:

• DUAL EXTRUDER NOT COMPATIBLE - 1504/1412 Plus Dual Extruder users.  You will have to use Rev F5 or earlier.
• 1505 Play Users w Ubis 13 Hot End - Click here for wiring instructions.
• 1405 Maker's Kit Users - Select the €œPlay 1505€ option.
• LCD Users: Both v1 and v2 LCD screens are NOT compatible
• The Rev F Printrboard can be used with models with and without an Auto Leveling Probe.   Click here for instructions for connecting a Z end stop and full wiring diagrams.

Requirements:

• Installation Required: YES - Click here for wiring diagrams.
• 6 pin male dongle, or 6 pin male ATX connector from an ATX power supply

Firmware:

• Your Rev F Printrboard will come pre-flashed with the firmware that you have selected.  Click here for more instructions on re-flashing.

Shipping:

• Weight: 1 lbs
• Dimensions: 6" x 4" x 1" (L x W x H)