RP2040-Plus, MCU Board Based on Raspberry Pi MCU RP2040, Pre-Soldered Header

Waveshare 20808 - RP2040-Plus, A Low-Cost, High-Performance Pico-Like MCU Board Based On Raspberry Pi Microcontroller RP2040 - With Pre-Soldered Header

Need more Flash for Raspberry Pi Pico? Dislike the outdated Micro USB connector? All these problems are solved by our RP2040-Plus now.

As same as Raspberry Pi Pico, it incorporates the RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins.

What's different, it features onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip.

Features

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 4MB of on-board Flash memory
• USB-C connector, keeps it up to date, easier to use
• Lithium battery recharge/discharge header, suitable for mobile devices
• Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch
• Castellated module allows soldering direct to carrier boards
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 26 × multi-function GPIO pins
• 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating-point libraries on-chip
• 8 × Programmable I/O (PIO) state machines for custom peripheral support

Pinout Definition

What's On Board

1. LED user LED (not power indicator)
2. ETA6096 high efficiency Lithium battery recharge manager
3. TPS63000 high efficiency DC-DC buck-boost chip
4. USB Type-C connector
5. BOOT button press it when resetting to enter download mode
6. W25Q32JVSSIQ 4MB NOR-Flash
7. RESET button
8. RP2040 dual-core processor, up to 133MHz operating frequency
9. Battery header MX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
10. Pinout compatible with Raspberry Pi Pico
11. USB test points connecting to USB interface
12. BOOT test point connecting to BOOT button
13. DEBUG points

Outline Dimensions

Resources

• Wiki: RP2040-Plus