InnoMaker HiFi DAC Audio Hat for Raspberry Pi
- The HiFi DAC Hat compatible with Raspberry Pi Zero, Zero W, 3B, 3B+, Pi 4 with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits.
- Absolutely perfect to support all Raspberry Pi music playback system, like OSMC, Max2Play, RuneAudio, Volumio, Moode, PiCorePlayer, PiMusicBox, OpenELEC, Debian, Ubuntu etc. Support playing music from a hard disk or over the network. Support DSD over PCM(DOP) mode.
- Class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. Provides 2.1Vrms ground-centered outputs coupled with Film capacitor.
- On-board a pair of gold plated RCA (LEFT &Right) jacks and a 3.5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another terminals.
- Comes with software, document and friendly technology support. For more information, please refer to the wiki.
Features
- The Innomaker HiFi DAC Hat maybe the best optimized partner for Raspberry Pi audio output.
- Used on-board PCM5122 as the IIS clock master, instead of the clocks from RPI which comes with too much jitter.
- Added dual low jitter oscillators(45.158M and 49.152M) to support more exact sample rate clocks.
- No soldering, no additional cables. Just plug it in and do some simple configuration,
- You would get a high-class music player which is low-cost.
TI PCM5122 Chipset
Audiophile Texas Instruments 32bit/384KHz DAC PCM5122
- DAC SNR is 112Db.
- DAC THD+N @ -1 dBFS -78dB.
- Full Scale Output of DAC is 2.1Vrms.
- Dynamic Range of DAC is 112dB.
- Sampling Frequency ranges from 8kHz to 384kHz.
- Ultra-low noise voltage regulators for optimal audio performance.
TPA6130A2 Amplifier
Stero Directpath Headpfone Amplifier TPA6130A2
- Integrated EEPROM for automatic configuration(Option).
- Automatically switching frequencies according to the input I2S signals.
- Dual low jitter crystal oscillators for Master Clock generation.
- Infrared remote control connector (using GPIO26).
- DAC output coupled with Film capacitor.
40-Pin Connector
Compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+, A+, A with the 40-pin connector.
Features
- Dedicated 384kHz/32bit high-quality DAC PCM5122 for best sound quality.
- Audio output connectors: 2x RCA (LEFT &Right) &3.5mm head phone Jack.
- With 138mw headphone Amplifier can directly drive headphone.
- Work status indicators facilitate the understanding of the system working status.
- HAT size.
- DAC SNR is 112Db.
- DAC THD+N @ -1 dBFS -78dB.
- Full Scale Output of DAC is 2.1Vrms.
- Dynamic Range of DAC is 112dB.
- Sampling Frequency ranges from 8kHz to 384kHz.
- Ultra-low noise voltage regulators for optimal audio performance.
- Integrated EEPROM for automatic configuration(Option).
- Automatically switching frequencies according to the input I2S signals.
- Dual low jitter crystal oscillators for Master Clock generation.
- Infrared remote control connector (using GPIO26).
- DAC output coupled with Film capacitor.
Includes
- 1 x RPI-HIFI-DAC Module
- Note: The raspberry pi 3 board is not included.