Categories - PiShop.ca

Sub Categories

Stepper Motor Mount - NEMA 23 (Actobotics)

$11.95

The NEMA 23 Stepper Motor Mount connects to the topside of a stepper motor to make integrating it into your Actobotics project even easier. Thanks to the 1.5" hub pattern this stepper motor mount can attach to Actobotics channels or any other surface...

Notify Me

Stepper Motor Mount - NEMA 17 (Actobotics)

$11.95

The NEMA 17 Stepper Motor Mount connects to the topside of a stepper motor to make integrating it into your Actobotics project even easier. Thanks to the 0.77" hub pattern this stepper motor mount can attach to Actobotics channels or any other surface...

Notify Me

Adafruit Feather 32u4 Bluefruit LE

$34.95

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather 32u4 Bluefruit - our take...

Notify Me

DRV8825 Stepper Motor Driver Carrier, High Current

$13.95

This version of the DRV8825 Stepper Motor Driver Carrier ships with 0.1″-pitch male header pins installed as shown in the main product picture, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. This...

Notify Me

ACS711EX Current Sensor Carrier -15.5A to +15.5A

$4.95

This current sensor is a carrier board or breakout board for Allegro's ACS711KEXLT-15AB-T Hall effect-based linear current sensor with overcurrent fault output; we therefore recommend careful reading of the ACS711 datasheet (533k pdf) before using this...

Notify Me

Sharp GP2Y0A41SK0F Analog Distance Sensor 4-30cm

$11.95 $14.95

The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than other IR alternatives. Interfacing to...

Notify Me

Zumo 32U4 Robot (Assembled with 50:1 HP Motors)

$149.95 $179.95

The Zumo 32U4 is a highly integrated, user-programmable and customizable tracked robot. It measures less than 10 cm on each side and weighs approximately 275 g with batteries (170 g without), so it is both small enough and light enough to...

Notify Me

Micro Maestro 6-Channel USB Servo Controller (Assembled)

$22.95

The six-channel Micro Maestro raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want high-performance servo control (0.25Î¼s resolution with...

Add to Cart

A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge (2.7V-11V)

$29.95 $38.95

The A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge is a programmable module well-suited for robotics applications, designed to work either as an auxiliary controller mounted to a Raspberry Pi or as a standalone control solution for a small...

Add to Cart

Dual MC33926 Motor Driver for Raspberry Pi (Assembled)

$49.95 $59.95

This motor driver board is an add-on for the Raspberry Pi Model B+, Model A+, Pi 2 Model B, or Pi 3 Model B that lets it easily control a pair of bidirectional, brushed DC motors. The expansion board uses a pair of Freescale...

Add to Cart

Printrbot Simple V2 3D Printer

$1,489.00

The new Printrbot Simple stands alone in a crowded field of affordable desktop 3D printers. It is beautiful but different. It's not a box, so you can watch the action from any angle. It's clean, straightforward design thoughtfully exposes the...

Notify Me

MySignals SW BLE Complete Kit (eHealth Medical Development Platform) - American Version

$3,195.00

MySignals is a development platform for medical devices and eHealth applications. You can use MySignals to develop your eHealth web, Android or iOS applications or even to add your own sensors to build new medical devices. The MySignals SW BLE Complete...

Notify Me

MySignals HW BLE Complete Kit (eHealth Medical Development Platform for Arduino) - American Version

$1,795.00 $2,995.00

Notify Me

Teensy 3.2 - Pins Version

$34.95

Actual size is 1.4 by 0.7 inch The Teensy USB Development Board is a complete USB-based microcontoller development system. Teensy 3.2 is a direct, 100% compatible replacement for Teensy 3.1. It is fully compatible with all shields and add-on boards made...

Notify Me

Barcode Reader/Scanner Module - CCD Camera - USB Interface

$99.95

Decode nearly any kind of 1D (striped) barcode in your project using this adorable compact barcode scanner. We've looked all over for a small, light, low-power module that can be easily integrated. This OEM scanner has a little camera inside that takes...

Notify Me

GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2/Pi 3 - (40 pins)

$3.95

That new Raspberry Pi® Model B+ computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming...

Add to Cart

Flex Cable for Raspberry Pi Camera - 1 meter

$4.95

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 1 meter long...

Add to Cart

Teensy 3.2 + header

$29.95

Teensy 3.2 is a small, breadboard-friendly development board designed by Paul Stoffregen and PJRC. Teensy 3.2 brings a low-cost 32 bit ARM Cortex-M4 platform to hobbyists, students and engineers, using an adapted version of the Arduino IDE...

Notify Me

PiDrive Foundation Edition - HDD 375GB

$0.00

Combining SD card and USB drive functionality, the WD PiDrive Foundation Edition is the ideal storage solution for Raspberry Pi. The microSD comes preloaded with custom software, so that you can start creating Raspberry Pi projects quickly and easily...

Notify Me

PiDrive Foundation Edition - USB Flash 64GB

$0.00

Notify Me