Categories - PiShop.ca

Sub Categories

Perfect for makers of all ages. Get started with some of littleBits' favorite modules, like fan and vibration motor, that aren't found in other kits. No soldering, wiring, or programming required. Over 600,000 circuit combinations possible Includes...

Notify Me

littleBits - Base Kit

$109.95

Getting started with littleBits has never been easier. Base Kit is perfect for kids and younger makers, while not sacrificing the power and flexibility. No soldering, wiring, or programming required! Over 150,000 possible circuit combinations Includes...

Notify Me

Wireless-N USB Long-Range Wifi Network Adapter

$19.95

Ralink RT3070L Chipset Complies with wireless 802.11b/g/n standards with data rate up to 150Mbps Theoretical working distance: 200 meters indoors and 830 meters outdoors (varies by environment) Frequency Range: 2.4~2.4835GHz Number of Channels: 13...

Notify Me

Uno R3 Rev3 Development Compatible Board

$15.95

This is an Arduino-compatible product Added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board Reliable RESET circuitry ...

Choose Options

MintyBoost Kit - v3.0

$26.45

The world's first and only open-source hardware charger: The MintyBoost®! New version! Works with the new iPhone 4 & 5 and more! Please review the Minty Boost project page(s) before purchase and assembly!, some phones require different...

Notify Me

TV-B-Gone Kit - Universal v1.2

$29.95

When we were putting together the TV-B-Gone kit, we started imagining a dystopian future, filled with televisions, where this kit would be super useful and we'd be a hero for having one. And while maybe that's dramatic, the TV-B-Gone is...

Notify Me

Altoids Mints Sized Tin

$2.95

Useful for larger electronic projects, including the YBox2 kit Dimensions Top lid outer (not lip): 2.36" (59.9mm) x 3.75"(95mm) Tin bottom: 2.3" (58.75mm) x 3.7"(93.9mm) Inner: 2.24" (56.9mm) x 3.6"(91.5mm) Height bottom section: 0.83" (21.28mm) Height...

Notify Me

Altoids Gum Sized Tin

$2.95

Ever since Altoids discontinued the Gum version, its been hard to get tins. So Adafruit went and got a whole mess of them custom made! These tins are exactly the same shape and size as the old Altoids gum tins but they are blank and they got the bottom...

Add to Cart

Adafruit USB Power Gauge Mini-Kit

$8.95 $10.95

This little USB port go-between is like a speed gauge for your USB devices. Instead of hauling out a multimeter and splicing cables, plug this in between for a quick reading on how much current is being drawn from the port. Great for seeing the charge...

Notify Me

MicroHOPE

$14.95 $29.95

Please note: the packaging of the product (carton box) might be slightly unsound. The content of the kit is totally intact. MicroHOPE - A micro-controller development kit based on Atmel ATmega32. MicroHOPE supports coding in assembler & C language,...

Notify Me

ExpEYES V2.0

$19.95 $79.95

Please note: the packaging of the product (carton box) might be slightly unsound. The content of the kit is totally intact. The ExpEYES 2.0, or ExpEYES Junior as its popularly called, replaces the expEYES with the following changes. Hence the ExpEYES'...

Notify Me

BBONE-BLACK-4G BEAGLEBONE BLACK REV C

$79.95

3D Graphics/NEON Floating-point Accelerator 4GB eMMC On-board Flash Storage USB Interface

Notify Me

High Performance Silicon Power Blaze B10 16GB USB 3.0 Flash Drive

$12.95

Read: 90MB/s, Write: 70MB/s Fast and affordable "SSD" for your Pi

Notify Me

Bright Pi - Bright White and IR Camera Light for Raspberry Pi

$19.95

The Bright Pi is a breakout/add on board for the Raspberry Pi (can be used with other I2C devices too – Arduino etc.) which adds both visible bright white light and infrared illumination to the Raspberry Pi, for use with the Raspberry Pi camera...

Notify Me

Broadcom WiFi Adapter and 2 Port USB Hub for Raspberry Pi

$14.95 $24.95

This product is no longer available. Broadcom, the designers and manufacturers of the BCM2835 SoC (system on a chip) that sits at the heart of the Raspberry Pi, have created this dual function USB WiFi (802.11b/g/n) dongle with integrated 2-port USB hub...

Notify Me

Assembled Pi Cobbler Plus - Breakout Cable for Raspberry Pi A+/B+/Pi 2/Pi 3

$7.95

The Raspberry Pi B+ / Pi 2 / Pi 3 / Pi 4 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably...

Notify Me

Assembled Pi T-Cobbler Plus - GPIO Breakout for A+/B+/Pi2/Pi3/Pi4/Zero

$11.45

This is the assembled version of the Pi T-Cobbler Plus. It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2,Pi 3, Pi 4! Or just any Pi with 2x20 connector. The Raspberry Pi B+ and Pi 2 has landed on the Maker World like a 40-GPIO...

Add to Cart

Downgrade GPIO Ribbon Cable for Raspberry Pi Model B+2B/3B 40p to 26p

$2.95 $4.45

You got a Raspberry Pi Model B+ that you want to have work with some old kit or plate or breakout or something and it uses the classic 26-pinout. Very frustrating, it is...unless you have this ingenious 'downgrade' GPIO cable. It has a 40-pin socket...

Add to Cart

Pimoroni Pibow Rainbow for Raspberry Pi (2, 3B, 3B+)

$15.95 $21.95

Pibow. The most stylish, add-on friendly, and protective case for the Raspberry Pi 3 B+! Features Compatible with Raspberry Pi 3 B+, 3, and 2 Fully HAT-compatible Works great with standoffs! Protects your beloved Pi! Now includes a free...

Notify Me

Pimoroni - Pibow - Ninja for Raspberry Pi (2, 3B, 3B+)

$15.95 $21.95

Notify Me