Audio Video Capture Cards HDMI to USB HDMI Video Capture, Full HD 1080P USB 2.0 Record via DSLR Camcorder Action Cam, Facebook Portal TV Recorder, Game Streaming, Teaching, Live Broadcasting Plug and Play---Easy to use, NO driver required, easily...

The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C-enabled device. The Qwiic...

The adaptor allows the Raspberry Pi 4 to be used with a Pi USB-C power supply (or DC barrel jack) whilst allowing access to USB 2 OTG data over a separate USB-C connection (USB3 data is not connected/passed through). USB Type-C (DATA POWER) <> USB...

The kit contains the following connector boards and pin headers. QtyTypeGender 2 Micro USB Male 2 Micro USB Female 2 USB Type-A Male 2 USB Type-A Female 4 - 6way long pin header Of the 6 pins on the connector boards two are used for 5V...

The adaptor allows the Raspberry Pi 4 to be used with a Pi Micro USB power supply (or DC barrel jack) whilst allowing access to the OTG USB. USB Type-A (data and power) <> USB Data (Micro USB) and Power (Micro USB/Barrel jack). USB Type AMicro...

SPECIFICATIONS Rainbow flat cable: IDC 40pin Male to Female Ribbon Cables Kit flat GPIO Cable Length: about 20 cm / 8 inch Material: High-quantity copper soft wire material for safe and durable Easy assembly:The cables can be separated to form an...

Waveshare 17939 - Industrial USB TO TTL Converter, Original FT232RL Onboard, Multi Protection Circuits, Multi Systems Support USB signal & Pinouts Definition 5V 5V output VCC 3.3V or 5V output, configured by...

USB To TTL, With Embedded Convertor - NOT COMPATIBLE WITH WINDOWS 11 USB to TTL 4-pin Wire specification: Embedded convertor: PL2303 Supports windows XP/7/8/8.1/10/... Connector: USB Type-A plug, 4-pin 2.54mm pinheader Pinout: Red - VCC...

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal...

This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and...

USB 3.0 SuperSpeed adapters are a great way to quickly change the connection type or gender of an existing USB cable. This adapter has USB Type C Male opposite USB 3.0 Type A Female.  Features Connector A: USB Type C Male Connector B: USB...

USB Type-C to USB 3.0 A-Male Cable - 5FT

USB Type-C to USB 2.0 A-Male Cable - 5ft

USB Type-C to USB 2.0 A-Male Cable - 3ft

HDMI Cable, Gold Plated - 6ft

This 3 ft cable connects from microHDMI to full sized HDMI. It's a perfect fit for the Raspberry Pi 4 or 5, which features microHDMI ports.

Cat6 Ethernet Network Patch Cable RJ45 - 3ft

Caution! This product is NOT compatible with the new Raspberry Pi Zero W 2 Using solderless pins the adapter slides onto the back of a Pi Zero GPIO (If a permanent connection is required the adapter can still be soldered to the GPIO header). The adapter...

Enables power to a USB device to be turned on/off via a USB power switch (MOSFET). Configuration Supplied with the PD (pull down) resistor set (Normally off). Connectors on top for GND / EN / 5V When the EN pin is connected to >2V (5V max) power to...

USB Serial Adaptor Plugs directly onto our Cluster HAT and MMC (SD) HAT to provide serial console access to the Raspberry Pi for quick access. Using jumper wires it can be used to access the serial on a Raspberry Pi and for Arduino programming (using RTS...