The Little Buddy Talker - Arduino Compatible Speech Chip Set Videos The "Little Buddy Talker" Complete 254 Word Library Demo The Little Buddy Talker - Complete Video Manual The LITTLE BUDDY TALKER - Detailed Assembly Video The Final Lookup...

This board is used for testing the soft-serial interface of MicroHOPE. It can be used as a general purpose USB to Serial Converter.

Removable LEGO® compatible 6 x 10 top with four color options Works with the Raspberry Pi B+, 2, and 3 Works with all GoPro® compatible mounts 3 holes that align with 75mm Vesa mounts Works with GPIO cables without strain relief Includes 4...

The SparkFun Mini GPS Shield equips your Arduino Mini with access to a GPS module, µSD memory card socket and all of the other peripherals you'll need to turn your Arduino into a position-tracking, speed-monitoring, altitude-observing wonder logger...

This is the Adafruit Feather M0 RFM69 Packet Radio (433 MHz). Adafruit calls these RadioFruits, their take on an microcontroller with a RFM69 HCW packet radio transceiver plus built in USB and battery charging. Its an Adafruit Feather M0 with a...

The Arduino Yún is a microcontroller board based on the ATmega32u4 and the Atheros AR9331. The Atheros processor supports a Linux distribution based on OpenWrt named Linino OS. The board has built-in Ethernet and WiFi support, a USB-A...

The DE2120 scanner module, buzzer, and micro-USB connector make up the Barcode, a sturdy and compact barcode scanner board. It can scan 20 distinct barcode symbologies in the 1D and 2D symbology segments, such as barcodes and QR codes. The Barcode...

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in yellow. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL...

You will squeak with delight when you hold this adorable miniature LED matrix. 0.8" square, its got everything a big LED matrix has, but bite sized! 64 bright blue LEDs are contained inside the plastic body, in an 8x8 matrix. There are 16 pins on the...

Locate your stuff! The Asset Tracker Kit contains all of the pieces you need to build a GSM + GPS location tracker for your most prized possessions. In addition to a GPS Shield, the Asset Tracker Kit comes with a weatherproof enclosure, so it’ll...

The ClusterCTRL Stack (controller and passive backplane) is a simple way to both power and control cooling for a stack of 5 Raspberry Pi. Controller Powered by 12-24V PSU (not included). 20 pin header for Power (2x5V and 2xGND for each Pi). 6 pin...

The Digi HAT Case is a sleek, stylish and strong enclosure for your Raspberry Pi and JustBoom Digi HAT. The two piece case is incredibly easy and straight forward to use. Removing or installing the Raspberry Pi and Digi HAT board is quick and...

Add real-time clock and environment sensing (pressure, temperature, & humidity) capabilities to the micro:bit with the Kitronik RTC Board. MakeCode compatible. This RTC & Klimate board is a Real Time Clock (RTC) and environmental sensor (BME280)...

The toggle switch Bit is sturdy on/off switch that you can use to activate your creations with a nice, solid click. Try using it after a USB power Bit as an on/off switch for your whole creation. Check out our Tips + Tricks for more ideas on using the...

The Microsoft Internet of Things Pack for Raspberry Pi 3 is the best way to get started using Windows 10 and your Raspberry Pi as an IoT enabled device. A collaboration between Microsoft's IoT division and Adafruit, this pack's the best way to...

The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC - a leading platform for Internet of Things (IoT) or WiFi-related projects. The Thing is low-cost and easy to use, and Arduino IDE integration can be achieved in just...

The SparkFun Large Digit Driver is a chainable controller backpack that can be soldered directly to the back of a large 6.5" 7-segment displays. Large numerical displays are a great addition to any project where you want to be able to see information at...

This gearmotor consists of a low-power, 12 V brushed DC motor combined with a 377.93:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in...

The A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge is a programmable module well-suited for robotics applications, designed to work either as an auxiliary controller mounted to a Raspberry Pi or as a standalone control solution for a small...

Use these little yellow adapters to connect CUBELETS and LEGO® bricks