Dupont Wire Color Jumper Cableï¼ÂŒ2.54mm Female to Female For Arduino

Handy for making wire harnesses or jumpering between headers on PCB's These premium jumper wires are 20cm long and come in a 'strip' 0.1" male header contacts on one end and 0.1" female header contacts on the other Fit cleanly next to each other on...

Multicolored / comes in a 40-pin separable ribbon cable Great for microcontroller experiment

This is a row of 40 break away headers spaced 0.1" apart with long pins on both sides. This header is especially useful when you need to connect a PCB to a solderless breadboard. Each header can be broken apart to your preference to fit custom PCBs or...

This economy breadboard wiring kit contains 140 pcs of cut and preformed jumper wires in a plastic reusable storage box. These wiring kits are ideal for use with any breadboard. Each jumper has stripped ends and preformed right-angled leads for easy...

Allows four HAT or pHAT (or a mix) to be attached to a single Raspberry Pi 40 way connector. All pins are connected, ID_SD and ID_SC (HAT EEPROM) have cuttable solder jumpers. For HAT/pHAT with an EEPROM (required by the HAT specification) you will...

Stack on top of your official POE HAT with this custom-made extra-tall 2 x 2 pin female header and 2 x 20 pin female header. This is a set of two headers which allows you to stack a POE HAT and another HAT on top of your Raspberry Pi This is...

We got fed up with low quality, overly-long alligator clip leads, so we got some made to our specification. Our leads are supplied in a bundle of 10 leads. Two each of black, red, white, green and yellow. Each lead is 185mm (7.5 inches) long from tip to...

Perfect for bread-boarding, free wiring, etc. This spool of solid-core wire is easy to solder to. When bent it keeps its shape pretty well. We like to have a few spools of this stuff around. We suggest picking up wire strippers to match. Wire gauge is 22...

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability for prototyping and use these...

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability for prototyping and use these all...

Perfect for bread-boarding, free wiring, etc. This spool of solid-core wire is easy to solder to. When bent it keeps its shape pretty well. We like to have a few spools of this stuff around. We suggest picking up wire strippers to match. Wire gauge is 22...

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability for prototyping and use...

GPIO Hammer Header (Solderless) – Male Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or...

Here's a snazzy accessory for your Raspberry Pi Zero or Zero W, a color-coded 2x20 header! This Color Coded Header takes the mystery out of your Raspberry Pi's 2x20 pinout. No longer will you stare in confusion at all 40 pins, trying to count out...

The :CREATE Proto Board for BBC microbit is an electronics prototyping system that allows for both through hole and SMT component types in the same circuits. Create prototype circuits using surface mount and/or conventional components with the :CREATE...

A 4-Way Riser perfect to use with the Raspberry Pi PoE HAT! Specifications Pitch: 2.54mm Gender of Connector: Female Number of Pins: 2 x 2 Pin Type of Row: Double-Row Body Orientation: Straight DIMENSIONS Overall Height: 11.2 mm Exposed...

If we could eat headers we'd have them for breakfast, lunch, and dinner.  But we can't : ( So we're making the best of it and selling them! This 2x20-pin strip, right-angle female header is a perfect companion piece to a 2x20-pin Dual Male...

Three rows in a right angle header!? Yes! These chunks of 0.1" header has yet-another-row - handy for when you want to connect cables that come in sets of three, like perhaps sensors, or servos. These plug into any standard 0.1" spacing perf-boards or...

MonkMakes Protoboard is designed to make the creation of one-off projects and prototypes as simple to make as possible by: 1. Using the same layout as 400 point €˜half' solderless breadboard (inspired by Adafruit's...