Raspberry Pi in Canada - Authorized Canadian Reseller

* Raspberry Pi

Sub Categories

Raspberry Pi HATs and Add-On Boards

Raspberry Pi Prototyping & GPIO

Raspberry Pi Screens and Displays

RS485 CAN HAT for Raspberry Pi

$19.95

Waveshare 14882 - RS485 CAN HAT for Raspberry Pi, Allows Stable Long-distance Communication The RS485 CAN HAT will enables your Pi to communicate with other devices stably in long-distance via RS485/CAN functions. Features Standard Raspberry Pi...

Add to Cart

CamJam EduKit 2 - Sensors

$14.95

The CamJam EduKit 2 features the following components all neatly packaged in a project tin: 1 x Breadboard 1 x Immersible temperature Sensor 1 x PIR Sensor 1 x LDR 1 x Active Buzzer 1 x Red 10mm LED 1 x Blue 10mm LED 1 x 4.7K Resistor 2 x 330 Resistor...

Add to Cart

CamJam EduKit 1 - Starter

$9.95

The CamJam EduKit features the following components all neatly packaged in a project tin: A 400-point breadboard 3 LEDs (Red, Yellow and Green) A button A buzzer Resistors and jumper cables The kit is accompanied by a set of downloadable worksheets...

Add to Cart

Rectangular Tin Box with Window - Medium Size

$3.45

Clear plastic window for easy view of content Hinged lid Dimensions: 5.5" X 3.7" X .9"

Add to Cart

Get Started with MicroPython on Raspberry Pi Pico V2

$16.95 $18.95

Raspberry Pi Pico is a new low-cost, high-performance microcontroller board with flexible digital interfaces. Microcontrollers are computers stripped back to their bare essentials. You don’t use monitors or keyboards, but program them to take their...

Notify Me

Raspberry Pi Pico (Non-Wireless)

$5.65

CAUTION! This Raspberry Pico board is NOT wireless. The new W version is available on this page. Make sure to check our growing category for Pico Accessories! The Raspberry Pi Pico is a low-cost, high-performance microcontroller board with a...

Choose Options

SparkFun Auto pHAT for Raspberry Pi

$39.95 $44.95

The SparkFun Auto pHAT for Raspberry Pi is an all in one robotics package that focuses on quickly adding robot functionality and support to your Raspberry Pi or other single-board computer. The Auto pHAT can drive two small DC motors with or without...

Notify Me

SparkFun Top pHAT for Raspberry Pi

$64.95

Feeling fancy? Why not add a Top pHAT to your Pi pHAT stack? The SparkFun Top pHAT for Raspberry Pi is intended to be at the top of a pHAT stack so you won't find any pins for stacking on top of this board, but that's ok, because you will want to...

Add to Cart

SparkFun Qwiic pHAT Extension for Raspberry Pi 400

$7.95

The SparkFun Qwiic pHAT Extension for the Raspberry Pi 400 provides you with a quick and easy solution to access all of the 400's GPIO, stack your favorite HAT right-side up, or connect a Qwiic-enabled device to the I2C bus (GND, 3.3V, SDA, and SCL)...

Add to Cart

Universal Tilt-Adjustable Mount for Raspberry Pi Camera

$22.45

This larger version of the Tilt-Adjustable Raspberry Pi Camera mount allows for mounting the Raspberry Pi High Quality Camera, as well as the camera modules. The Universal Tilt-Adjustable Camera Mount for the Raspberry Pi attaches directly to the...

Notify Me

PiJuice Zero - A Portable Power Platform for Raspberry Pi Zero

$59.95

When plugged into any source, the PiJuice Zero acts as an Uninterruptible Power Supply (UPS) using intelligent power management to keep your Raspberry Pi Zero going. With an onboard Real-Time Clock (RTC), programmable LEDs and switches, user-friendly...

Notify Me

Flex Cable for Raspberry Pi Camera - 100mm / 4"

$2.65

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 100mm long...

Add to Cart

IQaudio Codec Zero

$27.95

Raspberry Pi/IQaudio Codec Zero is a Raspberry Pi Zero-sized audio I/O HAT. It delivers bi-directional digital audio signals (I2S) between Raspberry Pi Zero and its onboard Dialog Semiconductor DA7212 codec. Codec Zero supports a range of input and...

Add to Cart

Breadboard Wiring Kit

$8.45

This economy breadboard wiring kit contains 140 pcs of cut and preformed jumper wires in a plastic reusable storage box. These wiring kits are ideal for use with any breadboard. Each jumper has stripped ends and preformed right-angled leads for easy...

Add to Cart

Adafruit MagTag Starter Kit - 2.9" Grayscale E-Ink WiFi Display

$52.95

The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power is removed! The ESP32-S2 is great because it builds on the years...

Notify Me

HiFiBerry DAC2 Pro

$59.95

Compatible with: Raspberry Pi A+/B+/2B/3B/3B+/4B+/Zero This is HiFiBerry DAC2 Pro with a pair of gold-plated RCA jacks. It can be simply plugged onto your Raspberry Pi, without any soldering. HiFiBerry DAC2 Pro is the sucessor of your popular DAC+ Pro...

Notify Me

APlusCam

$5.95

Pi (3A+/etc), camera, camera cable, PSU are not included. What is it? APlusCam is designed in the shape of a Raspberry Pi HAT with mounting holes for a Raspberry Pi Camera and suction cups allowing the camera can look out through a window. The original...

Add to Cart

USB/PWR Splitter

$3.95

The adaptor allows the Raspberry Pi 4 to be used with a Pi Micro USB power supply (or DC barrel jack) whilst allowing access to the OTG USB. USB Type-A (data and power) <> USB Data (Micro USB) and Power (Micro USB/Barrel jack). USB Type AMicro...

Add to Cart

ClusterCTRL Stack

$115.95 $125.95

The ClusterCTRL Stack (controller and passive backplane) is a simple way to both power and control cooling for a stack of 5 Raspberry Pi. Controller Powered by 12-24V PSU (not included). 20 pin header for Power (2x5V and 2xGND for each Pi). 6 pin...

Add to Cart

4G / 3G / 2G / GSM / GPRS / GNSS HAT for Raspberry Pi, LTE CAT4, the Global Version

$105.95

Waveshare 17372 - 4G/3G/2G/GSM/GPRS/GNSS HAT For Raspberry Pi, Based On SIM7600G-H The SIM7600G-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty...

Add to Cart