Quadruplicate your GPIO pins and attach up to four add-ons to a single Raspberry Pi Pico with our formidable Pico Decker expander board! A Raspberry Pi Pico is NOT included Struggling to choose between Pico add-ons? Mix and match up an epic stack of...

Make some noise with this high quality stereo I2S audio add-on board for your Raspberry Pi Pico, with amplified headphone AND unamplified line level outputs! Raspberry Pi Pico is NOT included. Your Pico will need to have male headers soldered to it...

An easy, solderless, swappable way to use breakouts with your Raspberry Pi Pico - add up to three Pimoroni breakouts (2 x I2C and 1 x SPI) to the sturdy slots and get coding and creating! A Raspberry Pi Pico is not included Pico Breakout Garden Pack...

This ATX Control Board and Wire Set is for PiKVM V3 and V4, it is included with the products. It is made available for additional computers using those products. ATX Bracket Set for PiKVM sold separately. To remotely manage the power...

Designed to hold and protect your Raspberry Pi Zero and official Raspberry Pi Camera Module, the Camera Box is great for photography and surveillance projects where a tidy, compact and convenient package is required. Now updated to accommodate the...

The Pico Dongle Lite is a small micro USB plug to Type-A plug adaptor designed for use with the Pico H/W from Raspberry Pi but will be useful for many other jobs. Whilst there are many similar adaptors are available, this adaptor is quite compact when...

PicoADC16 for Raspberry Pi Pico [W] The PicoADC16 is a 16-port 10-bit ADC (Analog-to-digital converter) supporting up to 3.3 volts with screw terminals for easier usage. The PicoADC16 is a 16-port ADC board with screw terminals using two 8-port MCP3008...

Low Voltage Labs - Pi-Traffic LightThe Pi-Traffic light provides a fun and easy way to add three 10mm LEDs to your Raspberry Pi project. The red, yellow and green LEDs give visual feedback to the Raspberry Pi GPIO. The Pi-Traffic light can also be...

Pico Driver Motor HAT is a DC motor control module that is powered by one H-bridge IC L293D with the motor input supply range 6 V-12 V. It is designed to connect 2 DC motors simultaneously or 1 stepper motor that would help the user to make projects in a...

An easy, solderless, swappable way to use breakouts with your Raspberry Pi Pico - add up to six Pimoroni breakouts (4 x I2C and 2 x SPI) to the sturdy slots and get coding and creating! Pico Breakout Garden Base sits underneath your Pico and lets you...

4x4x4 LED Cube HAT for Raspberry Pi Pico with 5V DC operating voltage. Pico cube, a monochromatic( Red, Blue, Green) LED with 64, is a fun way to learn programming. It is designed to perform incandescent operations with low energy consumptions, robust...

Includes 2x DF13 6-pin to 2.54 mm female jumpers for UART and ADC ports 1x DF13 4-pin to 2.54 mm female jumpers for I2C port Wire length: 200 mm

Supports LiPo batteries up to 6S Max current sensing: 60 A* Switching regulator output: 5.3 V 2.25 A 6-pos DF13 cable for connection to Navio2 power port *power module can sense current up to 90A if different connectors are used (XT60 connectors...

An LED Bulb for use with microcontrollers. The board is designed to make it super-easy to attach a high brightness bulb to a Raspberry Pi, Pico, Arduino, ESP32 or other microcontroller board. 3V to 6V operation Built-in MOSFET for PWM and on/off...

A 15cm extension cable for a microSD card. Insert your microSD card into one end and then connect the other end to your Pi / PC / anything with a microSD socket and voila, you're connected! Resources Dimensional drawing

These short standoffs will let you securely attach compatible HATs to a Pi Zero or Zero W, to make a nice, slim sandwich. The standoffs have a 3mm screw at one end, which could be used to pass through a Raspberry Pi or other PCB and have a screw...

Waveshare 21308 - Dedicated Aluminum Heatsink For Raspberry Pi Zero Series, Zero / Zero 2 W Aluminum Heatsink For Zero Series: Dedicated Aluminum Heatsink, Corrosion / Oxidation Resisting, Better Heat Dissipation Tailored For Raspberry Pi Zero...

Get creative with the Pen Lifter add-on for the Autonomous Robotics Platform. This add-on allows you to take full advantage of the pen hole in the Kitronik Autonomous Robotics Platform (Buggy) for Pico. Once fitted, the add-on allows you to control when...

A wireless monitoring system to help take good care of your plants. Monitor moisture levels with the soil sensors, or hook up pumps to make a whole auto-watering system! The new Enviro (Pico W Aboard) range is designed with environmental monitoring /...

Waveshare 20240 - CAN Bus Module For Raspberry Pi Pico, Enabling Long Range Communication Through UART Features Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series Incorporates E810-TTL-CAN01 module, UART to CAN bus...