Categories - PiShop.ca

Sub Categories

Solderless Serial to USB adapter for Raspberry Pi Zero

$12.95

Caution! This product is NOT compatible with the new Raspberry Pi Zero W 2 Using solderless pins the adapter slides onto the back of a Pi Zero GPIO (If a permanent connection is required the adapter can still be soldered to the GPIO header). The adapter...

Add to Cart

USB Power Switch

$4.95

Enables power to a USB device to be turned on/off via a USB power switch (MOSFET). Configuration Supplied with the PD (pull down) resistor set (Normally off). Connectors on top for GND / EN / 5V When the EN pin is connected to >2V (5V max) power to...

Notify Me

USB CDC Serial Adaptor (3.3v)

$6.45

USB Serial Adaptor Plugs directly onto our Cluster HAT and MMC (SD) HAT to provide serial console access to the Raspberry Pi for quick access. Using jumper wires it can be used to access the serial on a Raspberry Pi and for Arduino programming (using RTS...

Add to Cart

USB Console Stub - Serial adaptor for Raspberry Pi

$6.45

USB to (3.3v) Serial adaptor for use with the Raspberry Pi with a pinout designed to plug straight onto Pi GPIO pins (26 or 40 pin). Its a low cost no fuss adaptor which uses built-in USB-CDC drivers on most modern operating systems (Win10/Linux/Mac OS...

Add to Cart

SparkFun Air Quality Sensor - SGP30 (Qwiic)

$27.95

The SparkFun SGP30 Air Quality Sensor provides information on the quality of the air in your room or house by monitoring the volatile organic compounds around the sensor. The SGP30 Air Quality Sensor can return valid indoor air quality (IAQ) readings...

Add to Cart

DC-DC 12V to 3.3V 5V 12V Power Module Multi Output Voltage Conversion

$2.45

This DC-DC 12V to 3.3V 5V 12V Power Module Multi Output Voltage Conversion is also known as Buck Converter or also as Step-Down Voltage Converter. The module is capable of altering the output of the power source/supply before...

Add to Cart

RS232 Board

$5.95

RS232 Communication Board, SP3232 On Board, 3V-5.5V, ESD Enhanced, Hardware Flow Control Supported Overview The RS232 Board is used for establishing RS232 communication with devices powered from 3V - 5.5V. It contains SP3232 (RS-232...

Add to Cart

MAX 485 Module / RS- 485 Module / TTL to RS- 485 Converter Module

$2.50

Features: On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver. On board then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring. All pins of chip have been lead to can be...

Add to Cart

Stackable acrylic case for FOUR Raspberry Pi 4

$24.95

Features This case just has top and bottom boards, so you can access the Raspberry Pi from all sides There is a cooling fan for each layer The acrylic material won't block the Wi-Fi and Bluetooth signal You can stack many layers on it, suitable for DIY...

Add to Cart

Stackable acrylic case for THREE Raspberry Pi 4

$19.95

Add to Cart

Stackable acrylic case for TWO Raspberry Pi 4

$11.95

Add to Cart

SATA SSD to USB Adapter

$9.95

Need more gigabytes on your Pi? Connect a SATA SSD to your Raspberry Pi with this compact, high-performance USB 3.0 to SATA adapter. Great for storing media, games, data, or backing up your projects! This new version of our USB to SATA...

Add to Cart

4 & 40 Pin Extra Tall Header (Push Fit Version) - POE HAT Set

$3.95

Stack on top of your official POE HAT with this custom-made extra-tall 2 x 2 pin female header and 2 x 20 pin female header. This is a set of two headers which allows you to stack a POE HAT and another HAT on top of your Raspberry Pi This is...

Add to Cart

HiFiBerry DAC2 HD

$153.95

Compatible with: Raspberry Pi A+/B+/2B/3B/3B+/4B/Zero The HiFiBerry DAC2 HD is a high-end DAC for the Raspberry Pi. It can be simply plugged onto your Raspberry Pi, without any soldering. ADDITIONAL INFORMATION Weight 30 g Dimensions 5.5...

Add to Cart

BBC micro:bit Club Set

$244.95

The MB224-US is a BBC micro:bit club single board computer. It is perfect for sharing the BBC micro:bit with friends, the BBC micro:bit club is a 10 pack containing all the pieces needed to enjoy BBC micro:bit in STEM groups, coding clubs, school...

Notify Me

Allo Nirvana SMPS

$82.95

The Allo Nirvana SMPS was designed to power audio devices with the lowest noise. Two years was spent developing this product, the longest of any Allo product to date! There are 3 types of noise: 1. Differential noise (noise on power lines compared to...

Notify Me

Tripod for Raspberry Pi HQ camera

$8.95

Lightweight, compact, and flexible. This tripod is perfect for any small camera. You can wrap it around objects or stand it up on its own. The pivoting ball head allows a good range of motion and pivots 90 degrees as shown in the product photos. The...

Add to Cart

Complete Component Kit for Raspberry Pi

$32.95

A complete toolkit with several components - Perfect to build, code, and play with your Raspberry Pi board! Compatibility Raspberry Pi 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero (sold separately) Includes 1x Solderless Prototype...

Add to Cart

Elecrow Starter Kit for Raspberry Pi and Arduino

$44.95

This Starter Kit comes with a great array of items to connect to Raspberry Pi or Arduino. The main components are an LCD1602 display, stepper motor, servo motor, remote, touch sensor, and ultrasonic distance sensor. You can make some amazing creations...

Notify Me