Categories - PiShop.ca

Sub Categories

Adafruit Grand Central M4 Express featuring the SAMD51

$55.95

Are you ready? Really ready? Cause here comes the Adafruit Grand Central featuring the Microchip ATSAMD51. This dev board is so big, it's not named after a Metro train, it's a whole freakin' station! This board is like a freight...

Add to Cart

10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long

$4.94

These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming connectors. We see these connectors often on ARM Cortex dev kits, and have a few handy in our ARM-dev box. We thought you may...

Add to Cart

SWD (2x5 1.27mm) Cable Breakout Board

$3.95

This adapter board is designed to make it easier to use ARM dev boards that use slimmer 2x5 (0.05"/1.27mm pitch) SWD cables for programming. It's helpful for using products like the JTAGulator, STLink or SEGGER J-Link with...

Notify Me

Xenon Kit

$30.00

The Xenon is a low cost mesh-enabled development kit that can act as either an endpoint or repeater within a Particle Mesh network. The Xenon is mesh only and designed to function as the endpoint of your IoT network. It is based on the Nordic nRF52840...

Notify Me

Enviro for Raspberry Pi

$44.95

Pimoroni PIM486 - Monitor your world with Enviro for Raspberry Pi! There's a whole bunch of fancy environmental sensors on these boards, and a gorgeous little full-colour LCD to display your data. They're the perfect way to get...

Notify Me

Kitronik ARCADE for MakeCode Arcade OLD

$50.95

The MakeCode Arcade editor has been designed to allow everyone, from beginners to experienced game enthusiasts, to create retro arcade games to run in the browser or on handheld consoles. It consists of drag and drop blocks that snap...

Notify Me

Kitronik ZIP Halo HD for micro:bit

$38.95

The Kitronik Halo HD board for the BBC micro:bit incorporates 60 individually addressable full colour ZIP LEDs. It also breaks out P1 and P2 to a standard 0.1 footprint, it features a MEMS microphone for detection of sound, and a piezo buzzer to play...

Add to Cart

Kitronik Discovery Kit for the BBC micro:bit

$17.95

The Kitronik Discovery Kit for BBC microbit is a great way to get started with both programming and electronics. The Kit contains five experiments that start very simply, building up to simulating real world systems as confidence grows...

Add to Cart

16 GB Micro SD Card Pre-Programmed with NOOBS, Class A1, SD Adapter, Jewel Case

$12.95 $14.95

16GB, class A1 uSD Card Pre-Programmed with NOOBS - With Micro SD Adapter & Jewel case New Out Of Box Software (NOOBS) is an easy operating system installation manager for the Raspberry Pi. This version will boot with Raspbian by...

Notify Me

64 GB Micro SD Card Pre-Programmed with NOOBS, Class A1

$17.95

64 GB, class A1 uSD Card Pre-Programmed with NOOBS New Out Of Box Software (NOOBS) is an easy operating system installation manager for the Raspberry Pi. This version will boot with Raspbian by default. However, NOOBS stays resident on...

Notify Me

32 GB Micro SD Card Pre-Programmed with NOOBS, Class A1

$15.95

32GB, class A1 uSD Card Pre-Programmed with NOOBS New Out Of Box Software (NOOBS) is an easy operating system installation manager for the Raspberry Pi. This version will boot with Raspbian by default. However, NOOBS stays resident on...

Notify Me

16 GB Micro SD Card Pre-Programmed with NOOBS, Class A1

$12.95

16GB, class A1 uSD Card Pre-Programmed with NOOBS New Out Of Box Software (NOOBS) is an easy operating system installation manager for the Raspberry Pi. This version will boot with Raspbian by default. However, NOOBS stays resident on...

Notify Me

Micro HDMI to Standard HDMI Adapter, White

$4.95

789RP-19040302 - Micro-HDMI to HDMI A/F Cable, 235 mm, White Connect your Raspberry Pi 4 to a standard HDMI cable with this small adapter The official Raspberry Pi 235 mm (~9") Micro-HDMI to HDMI adapter - allowing you to use a standard HDMI cable with...

Add to Cart

Micro-HDMI to Standard HDMI (A/M), 2m Cable, Black

$9.95

The official Raspberry Pi micro HDMI to HDMI (A/M) cable designed for the Raspberry Pi 4 computer. 19-pin HDMI Type D(M) to 19-pin HDMI Type A(M) 2m black cable Nickel-plated plugs 4Kp60 compliant RoHS compliant 3Mohm 300VDC insulation, withstands...

Add to Cart

Micro-HDMI to Standard HDMI (A/M), 1m Cable, Black

$6.95

The official Raspberry Pi micro HDMI to HDMI (A/M) cable designed for the Raspberry Pi 4 computer. 19-pin HDMI Type D(M) to 19-pin HDMI Type A(M) 1m black cable Nickel-plated plugs 4Kp60 compliant RoHS compliant 3Mohm 300VDC insulation,...

Add to Cart

Micro-HDMI to Standard HDMI (A/M), 2m Cable, White

$9.95

The official Raspberry Pi micro HDMI to HDMI (A/M) cable designed for the Raspberry Pi 4 computer. 19-pin HDMI Type D(M) to 19-pin HDMI Type A(M) 2m white cable Nickel-plated plugs 4Kp60 compliant RoHS compliant 3Mohm 300VDC insulation, withstands...

Add to Cart

6mm Wide Angle Lens for Raspberry Pi HQ Camera CS

$34.95

6mm Wide Angle Lens for Raspberry Pi HQ Camera Specifications Image format: 1/2" Focal length: 6mm Resolution: 3 MegaPixels Aperture: F1.2 Mount: CS (with the Raspberry Pi HQ Camera, DO NOT use the adapter) Field Angle:...

Add to Cart

16mm Telephoto Lens for Raspberry Pi HQ Camera CS

$69.95

16mm Telephoto Lens for Raspberry Pi HQ Camera Specifications Image format: 1" Focal length: 16mm Resolution: 3 MegaPixels Aperture: F1.4-16 Mount: C (with the Raspberry Pi HQ Camera, use the C-to-CS adapter) Field...

Add to Cart

Raspberry Pi HQ Camera CS

$69.95

Please note that this item does NOT function without a compatible C or CS mount lens. The Raspberry Pi High Quality Camera is the latest camera accessory from Raspberry Pi. It offers higher resolution (12 megapixels, compared to 8 megapixels),...

Choose Options

Aluminum Case for DigiOne Player

$74.25

A robust, modern aluminum case for the Allo DigiOne Player. Features built in heat dissipation and jet black anodized finish and includes DC-To-microUSB Adapter Cable. Fits the Allo DigiOne board and a Raspberry Pi 3B or Pi 3B+. Features Compatible with...

Notify Me