Categories - PiShop.ca

Sub Categories

A type of buzzer - it has to be driven by a pulsed output. It's tuned for around 2kHz when it will be at its loudest but will produce a tone across a wide range of frequencies. In the Block Editor, the black lead goes on to GND and the blue lead goes on...

Add to Cart

micro:bit Servo

$11.95

A small motor that moves it's output arm to a position depending on the signal sent to it with a reasonable degree of accuracy & repeatability. The brown lead with the black croc clip goes on to GND, the yellow lead goes on to the Pin 0, 1 or 2 that...

Notify Me

micro:bit Microswitch

$3.95 $4.95

Good for detecting boxes, drawers or doors being opened and much more. The black lead goes on GND, the red lead goes on 3v and the other lead goes on 0, 1, or 2. This item is somewhat polarity sensitive, the red & black leads need...

Add to Cart

micro:bit Temperature Sensor

$9.75

A very accurate temperature sensor using a calibrated chip called a TMP36GZ. It is accurate to ±1°C at +25°C. At this temperature it outputs 750mV. It changes by 10mV per °C. The black lead goes on GND, the red lead goes...

Add to Cart

micro:bit LDR Light Sensor

$7.25

An external light sensor for all your light sensing needs. The black lead goes on GND, the red lead goes on 3v and the other lead goes on 0, 1, or 2.This item is polarity sensitive, the red & black leads need to be on the correct...

Add to Cart

micro:bit Pushbutton

$3.95 $4.95

A pushbutton on a lead for when you need another pushbutton or you want it away from your micro:bit One lead goes on 3v or GND and the other lead goes on 0, 1, or 2. For advanced applications it is feasible to connect two pins with...

Add to Cart

micro:bit Potentiometer

$6.95 $7.95

Provides a variable voltage to an analog input via a twist knob - a volume control if you will. Can be used for any application where a user input across an analog range is required - for instance changing the frequency of the music output or the speed...

Add to Cart

micro:bit Water Sensor

$7.50

The Water Sensor Provides a variable analog reading depending on how wet/damp the sensor is. Good for plants or fingers. The black lead goes on GND, the red lead goes on 3v and the blue lead goes on whichever pin is being used in the program. This...

Notify Me

TFT FeatherWing - 2.4" 320x240 Touchscreen For All Feathers

$46.94

A Feather board without ambition is a Feather board without FeatherWings! Spice up your Feather project with a beautiful 2.4" touchscreen display shield with built in microSD card socket. This TFT display is 2.4" diagonal with a bright 4 white-LED...

Notify Me

Adafruit HUZZAH32 - ESP32 Feather Board (pre-soldered)

$31.95

Aww yeah, it's the Feather you have been waiting for, this time with pre-assembled headers! The HUZZAH32 is Adafruit's ESP32-based Feather, made with the official WROOM32 module. They packed everything you love about Feathers: built in...

Notify Me

3x4 Right Angle Male Header - 4 pack

$3.95

Three rows in a right angle header!? Yes! These chunks of 0.1" header has yet-another-row - handy for when you want to connect cables that come in sets of three, like perhaps sensors, or servos. These plug into any standard 0.1" spacing perf-boards or...

Add to Cart

DiddyBorg v2 Sensor Mount Kit

$14.95 $22.95

Want to add more sensors to your DiddyBorg v2? Our Sensor Mount Kit allows you to add 4x ultrasonics and an extra Pi camera to your robot. The kit consists of: 4x Ultrasonic mounts 1x Camera mount 16x M1.7 screws and nuts 2x...

Notify Me

DiddyBorg v2 Multifunction Top Kit

$12.95 $22.45

Want to add more sensors or an extra tier to your DiddyBorg v2? Our Multifunction Top Kit allows you to extend your robot to do even more :) With the Multfunction Top Kit fitted DiddyBorg v2 can now: Attach two servos to the top...

Notify Me

Mini Black HAT Hack3r – Fully Assembled

$19.95

Mini Black HAT Hack3r – Fully AssembledNeed to detach or debug your HAT? Then the Mini Black HAT Hack3r is for you! A nifty little tool that lets you access all of the GPIO pins while also running a HAT. Ideal for debugging your HAT projects or...

Add to Cart

PiJuice HAT - A Portable Power Platform For Every Raspberry Pi

$119.95

If it's not in stock check out this alternative product. Please check our portable Solar Panels specifically designed and manufactured for PiJuice! As one of the smallest systems around there are so many amazing things you could do with the Raspberry...

Notify Me

:MOVE Line Following Board

$7.95 $9.95

Add line following to your micro:bit buggy/robots with the compact Kitronik :Move Line Following Board for BBC micro:bit, also fully compatible with :MOVE mini. Add line following to your BBC microbit Robot/buggy projects with the :Move Line...

Notify Me

:MOVE mini Line Follower Interface cable

$2.45

Dupont 5 way Female to Female interface cable for the Kitronik Line Following Add On For :MOVE mini kit. It is also suitable for breadboards with 2.54mm pitch. This standard Dupont interface cable is the cable used in the Kitronik Line Following Add...

Add to Cart

Bumper Add-On For The :MOVE MINI

$3.95

Get more from :MOVE mini for the BBC microbit with the Bumper add-on. Turn :MOVE mini into a football/hockey game playing robot and compete against other robots. The BBC micro:bit is sold separately and the kit requires simple assembly, buy the...

Add to Cart

:GAME ZIP 64 for the BBC micro:bit

$52.95

The Kitronik :GAME ZIP 64 is the ultimate retro gaming accessory for the BBC microbit. It has been designed to be an all in one hand held gaming platform, which also includes a built in, 64 (8x8) individually addressable full colour ZIP LED, screen...

Add to Cart

BuyaPi Gift Card - $50

$50.00

Gift the power of the Pi! A $50 coupon code will be sent to you by email. You can surely keep it for yourself, or put the recipient's name, email address in the 'Order Notes' box at checkout. And we'll take care of everything. Note: We won't be able to...

Notify Me