24C32 32K I2C EEPROM Memor DS1307 based RTC with LIR2032 battery (Battery not included) Backup by AT24C32 32Kbit DS1307,AT24C32 can work separated Leads to the DS1307 clock pin, to provide the clock signal for the microcontroller Great for DIY projects ...

Various flame, fire detection, relay output, which can be accessed 220V high current electrical equipment Module Features: 1, can detect the flame or the wavelength at 760 nm to 1100 nm range of the light source, the test flame lighters distance of...

3.2 Inch TFT Color LCD Module with Touch Screen 320*240 ILI9341 LCD Touch Screen Panel Features: ILI9341 touch panel controller 3.3v voltage regulator LED Backlight 320x240 Pixel Color: 65536 Standard 16 Bit interface Included: 1Pcs x...

Chip: Dallas DS18B20 digital temperature sensor chip Measurement range: -55'C~125'C Measurement accuracy: +/- 0.5'C (Within -10'C~85'C) Convert accuracy: 9bit~12bit A/D Resolution: 0.5'C Power supply: 3.3V~5V Support multi-point network group...

Operating Voltage : 5V(DC) Static Current: Less than 2mA. Output Signal: Electric frequency signal, high level 5V, low level 0V. Sensor Angle: Not more than 15 degrees Detection Distance: 2cm-450cm High Precision: Up to 0.3cm Input Trigger Signal: 10us...

This is a digital temperature and humidity sensor module that works with all of the Arduino micro-controllers. Because it is a digital sensor it only necessitates 3 connections, Vcc, GND, and a digital pin for data output. With this sensor you get two...

The board might come in green color too This is an Ethernet Board that plugs directly into any Arduino UNO or other Arduino Board, allowing it to connect to the internet through an Ethernet connection. This allows you to control the Arduino through the...

This is a very popular LCD for the Arduino or Freeduino board. It includes a 2x16 LCD display which is backlit in blue. It uses the I2C communications protocol so it is compatible with any Arduino or Raspberry Pi! Key Features: Supports I2C...

4pin Mini Voice Sound Sensor Module Microphone Sound module - LM393 Chip  This sensor emits a signal if the microphone of the sensor detects a noise. The sensitivity of the sensor can be adjusted by means of a controller...

Operating Voltage: 5V With LED indicates relay status Control terminal, low level pull, high level relay release Great for DIY project

This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP,...

This is a digital light sensor that can be used to precisely measure the ambient light level.  The sensor has a 16 Bit AD converter so it outputs a digital signal that can be read using the Arduino's serial connections.  It...

This is what is known as a Real Time Clock (RTC) module and can be used with any Arduino so that it can tell time. The Arduino does not have a RTC on board and therefore can not tell time for an extended period of time with any accuracy. When the Arduino...

This is a digital temperature and humidity sensor module that works with all of the Arduino micro-controllers. Because it is a digital sensor it only necessitates 3 connections, Vcc, GND, and a digital pin for data output. With this sensor you get two...

This is an Arduino Compatible Ultrasonic sensor, it can be used to measure the distance from the sensor to other objects around it. These types of sensors are used on robots for collision avoidance and guidance or as trip sensors for alarm systems or...

L3G4200D is a 3 axis gyroscope, providing you with very high resolution (16 bit) measurements at up to 2000 degrees per second (dps).   The gyroscope measures how much the device is rotating around all three axis, the range is user selectable and so...

IIC digital output Up to two interruption function Three motion detection channels: Free fall down or motion detection. Pulse detection Vibration detection MMA8452Q is a 12 bit resolution smart, low power consumption, capacitor-type micro...

This is a digital Tap/Knock sensor on a small circuit board that is designed to work with all of the Arduino boards. It is easy to incorporate into any project requiring only a 5v supply, ground, and a digital input to measure the sensors readings (High...

This is an analog light sensor on a small circuit board that is designed to work with all of the Arduino boards. It is easy to incorporate into any project requiring only a 5v supply, ground, and an analog input to measure the sensors readings.  ...