Raspberry Pi in Canada - Authorized Canadian Reseller

* Raspberry Pi

Sub Categories

Raspberry Pi HATs and Add-On Boards

Raspberry Pi Prototyping & GPIO

Raspberry Pi Screens and Displays

Keyes IR Infrared Remote Control Kit

$4.95

Transmission distance: >8m Effective angle: 60' Quiescent current: 3-5uA Dynamic current: 3-5mA Ideal for Arduino DIY project 17-key IR remote control Transmit 38KHz modulating signal PLEASE NOTE: The IR Receiver Module that comes with this remote...

Add to Cart

8-Channel Relay Module for Arduino & Raspberry Pi - 5V

$8.95

This is a 5V 8-Channel Relay interface board able to control various appliances, and other equipment with large currents. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino,etc.). Features 5V 8-Channel Relay interface board,...

Add to Cart

Pimoroni Explorer HAT Pro for Raspberry Pi

$31.95

The Explorer HAT Pro is a terrific prototyping side-kick for all Raspberry Pi boards with 40-pin GPIO's! (All boards except original B and B+ from 2014) On the Explorer Pro from Pimoroni there are a heap of useful input and output options that will take...

Add to Cart

50cm USB - Micro USB Cable

$2.95

Add to Cart

Brass M2.5 11mm Standoffs for Pi HATs - Black Plated - Pack of 2

$0.95

"These go to eleven." 11 millimeters that is! Our Black Plated M/F Brass Standoffs are engineered specifically to keep your Pi HAT snug on your Pi while also keeping the two boards separated, in particular the HDMI port. These...

Add to Cart

HiFiBerry DAC+/Phone jack - Including Spacer

$40.95

The HiFiBerry DAC+ is a high-resolution digital-to-analog converter for the Raspberry Pi. This is a special sound card for the Raspberry Pi, that is optimized for one specific use case: the best audio playback quality. Dedicated...

Add to Cart

MCP3008 - 8-Channel 10-Bit ADC With SPI Interface

$5.95

Need to add analog inputs? This chip will add 8 channels of 10-bit analog input to your microcontroller or microcomputer project. It's super easy to use, and uses SPI so only 4 pins are required. We chose this chip as a great accompaniment to the...

Notify Me

USB Cable with Switch

$3.95

Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your electronic projects. Comes with a USB A...

Add to Cart

Wireless-N 300Mbps USB WiFi Adapter - HX9500

$14.95

WARNING: This adapter requires installation of a third-party driver. Although it is relatively simple, PLEASE READ THE INSTALLATION INSTRUCTIONS and ensure you are comfortable following them before buying this adapter. Update the driver source from...

Add to Cart

Flex Cable for Raspberry Pi Camera - 300mm / 12"

$4.45

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 300mm...

Add to Cart

Raspberry Pi Model A+ Case Lid - Clear

$1.95

This is just the clear lid of the Raspberry Pi Model A+ case. Check out our A+ base here. This enclosure was designed by Mike Doell. It's made of ultra-durable, super-glossy polycarbonate, and is both good looking and tough enough...

Add to Cart

Long-Range 300Mbps Wireless-N Adapter

$16.95

The best one we have. Offers the best coverage and high data transfer speed. Works with Raspbian/OpenELEC "out of the box". - Chipset: Realtek 8192CU (HX9700) - WiFi: 2.4Ghz IEEE802.11b/g/n - USB 2.0 - Max. 300Mbps - WPS - 5dBi RP-SMA antenna - Access...

Add to Cart

Pimoroni OmniVESA

$5.95

The perfect mounting solution for your Raspberry Pi! Simply remove the protective backing from the OmniVESA and follow the instructions below to mount your Raspberry Pi either bare or in any of the most popular cases. The nylon screws provided are...

Notify Me

Small Alligator Clip Test Lead (set of 12)

$5.95

Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors. Strong and grippy, these always come in handy! We often use these in...

Add to Cart

Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit

$24.95

The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to send these...

Add to Cart

Heat Sink Thermal Tape - 3M 8810 - 80mm x 80mm

$5.95

Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even across the area. A perfect match for our...

Add to Cart

Flex Cable for Raspberry Pi Camera - 2 meters

$6.95

Add to Cart

Aluminum Heatsink for Raspberry Pi B+/2/3 (2-Pack)

$2.45

Heatsink 1: Size: 14 x 14 x 6mm Baseboard thickness: 1.0mm Fin thickness: 0.7mm Fin number: 7 pieces Fin space width: 1.5mm Heatsink 2: Size: 9 x 9 x 4mm Baseboard thickness: 1.0mm Fin thickness: 0.9mm Fin number: 5 pieces Fin space...

Add to Cart

GPIO Stacking Header for Pi - Extra-long 2x20 Pins

$2.95 $3.95

Connect your own PCB to a Raspberry Pi and stack on top with this normal-height female header with extra long pins. The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has extra...

Add to Cart

GPIO Header for Raspberry Pi - 2x20 Female Header

$1.95

Connect your own PCB to a Raspberry Pi with this normal-height female header. The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3mm of pins, compared with Adafruit's...

Add to Cart