Raspberry Pi in Canada - Authorized Canadian Reseller

* Raspberry Pi

Sub Categories

Raspberry Pi HATs and Add-On Boards

Raspberry Pi Prototyping & GPIO

Raspberry Pi Screens and Displays

Tactile Button Switch (6mm) - 20 Pack

$3.45

Little clicky switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless breadboard. The pins are normally open (disconnected) and when the button is pressed they are momentarily closed. They...

Add to Cart

Adafruit Perma-Proto HAT for Pi Mini Kit - No EEPROM

$6.45

Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi Zero, A+, B+, Pi 2, Pi 3 and Pi 4 (any Pi with a 2x20 connector) with this jaunty prototyping HAT kit. To kick off the Adafruit HAT party, we have this Perma-Proto inspired...

Add to Cart

Adafruit Perma-Proto HAT for Pi Mini Kit - With EEPROM

$9.95

Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi A+, B+, or Pi 2 with this jaunty prototyping HAT kit with EEPROM To kick off the Adafruit HAT party, we have this Perma-Proto inspired plug in daughter board. It has a grid...

Add to Cart

Flirc Raspberry Pi 3 Case

$24.95

The Ultimate Case for your Raspberry Pi (Fits 3B+, 3B, 2B, B+) Caution! This model is NOT compatible with the latest Raspberry Pi 4. Please see the Flirc Raspberry Pi 4 Case. The Flirc Raspberry Pi case was designed to not only be functional for...

Add to Cart

SG90 180 Degrees 9G Micro Servo Motor Tower Pro

$4.95

Weight : 9 g Size : 22 x 11.5 x 27 mm Operating Speed (4.8V no load): 0.12sec/60 degrees Stall Torque (4.8V): 17.5oz/in (1.2 kg/cm) Temperature Range: -30 to +60 Degree C Dead Band Width: 7usec Operating Voltage:3.0-7.2 Volts

Add to Cart

SG5010 TowerPro Torque Coreless Servo 180 Degrees

$16.95

This high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with...

Add to Cart

HiFiBerry Digi+ Standard Version

$53.95

If you are looking for a case for HiFiBerry DAC+,Digi+ or AMP+ board - please check our own HighPi Case that was designed with HiFiBerry boards in mind. It's now in stock! The HiFiBerry Digi+ is a high-quality S/PDIF output board for the Raspberry Pi...

Add to Cart

HIFIBERRY DAC+ STANDARD - RCA VERSION

$39.95

If you are looking for a case for HiFiBerry DAC+,Digi+ or AMP+ board - please check our own HighPi Case that was designed with HiFiBerry boards in mind. It's now in stock! The HiFiBerry DAC+ is a high-resolution digital-to-analog converter for the...

Add to Cart

ModMyPi Modular RPi B+ Case - SD Card Cover (Black)

$1.75

The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look, and adaptability makes it perfect for many applications, including: the hobbyist maker, digital...

Add to Cart

ModMyPi Modular RPi B+ Case - Spacer Screw Pack ( 38mm )

$1.95

THIS ITEM IS A PACK OF 4 x 38mm M3 SCREWS SUITABLE FOR FIXING 1 SPACER PLATE ON THE MODULAR RASPBERRY PI CASE Spacers increase the internal height of ModMyPi's Modular Raspberry Pi Case by 10mm per spacer, and can be stacked to increase the...

Add to Cart

ModMyPi Modular RPi B+/2/3 Case - 10mm Spacer (Black)

$3.25

Add to Cart

ModMyPi Modular RPi B+/2/3B/3B+ Case - Black

$10.95

New Updated Version - Compatible with Raspberry Pi 2/3B/3B+ with Dual Light Pipes! The ModMyPi Modular Raspberry Pi case! The new ModMyPi deluxe Raspberry Pi 2/3B/3B+ case is a fully customisable and adaptable modular unit aimed to suit a...

Add to Cart

ModMyPi Modular RPi B+ Case - VESA Slice (200mm )

$5.95

Add to Cart

25 Tie-Points Solderless Breadboards (Pack of 6) with Baseplate

$2.95

One Terminal Strip, Tie-point 25. Material: ABS plastic Completely reusable. Accepts a variety of wire sizes (29-20 AWG). Red,green,blue,yellow ,white,and black are available for...

Notify Me

40-Pin Data Cable for Raspberry Pi B+

$4.95

40 pin cable, 30cm in length. Cable type: female-female

Add to Cart

Flex Cable for Raspberry Pi Camera - 19.6" / 500mm

$4.75

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.

Add to Cart

Pibow Royale - Enclosure for Raspberry Pi Model A+ Computers

$9.45

Pibow 3 A+ Coupé. The slim, hackable, and attractive case for the Raspberry Pi 3 A+. Features Compatible with Raspberry Pi 3 A+ Extra venting top and bottom, and a place for installing a heatsink if you really want to push your...

Add to Cart

Raspberry Pi - Skill badge, iron-on patch

$5.45

You are learning to use the small Linux based board, the Raspberry Pi! Adafruit offers fun and exciting "badges" of achievement for electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a...

Add to Cart

Altoids Gum Sized Tin

$2.95

Ever since Altoids discontinued the Gum version, its been hard to get tins. So Adafruit went and got a whole mess of them custom made! These tins are exactly the same shape and size as the old Altoids gum tins but they are blank and they got the bottom...

Add to Cart

MicroHOPE

$14.95 $29.95

Please note: the packaging of the product (carton box) might be slightly unsound. The content of the kit is totally intact. MicroHOPE - A micro-controller development kit based on Atmel ATmega32. MicroHOPE supports coding in assembler & C language,...

Add to Cart