Prototyping board designed for the Raspberry Pi Pico with the Pico pinout marked on the PCB. If you liked our breadboard for Pico and are ready to take your prototype to solder, you will love this board. This prototyping board is inspired by the...

Maximum Compatibility The RPI ADC Hat is compatible with models 2B, 3B, 4B, zero w, w2 and even the 400. All GPIO pins are free for other uses. You can even add another hat first and add the RPI ADC hat on top.  What if there is no room in the...

Bold, will hold! A big, beautiful, 5.7" (600 x 448 pixel) 7 colour electronic paper display for Raspberry Pi. This display is considerably bigger than Inky wHAT (check out the comparison photo!) with plenty of screen real estate for text or graphics...

Waveshare 18014 - Power Over Ethernet HAT (Type B) For Raspberry Pi 3B+/4B, 802.3af Power-Sourcing Equipment Required The PoE HAT (B) is a 802.3af-compliant Power Over Ethernet accessory for the Raspberry Pi 3B+/4B. By using this small HAT and some...

A super-simple, slimline way to hook up a hi-fi amp or powered speakers to your Raspberry Pi! Output punchy digital I2S audio whilst leaving your GPIO pins conveniently accessible. SHIM is a old Yorkshire term meaning 'Shove Hardware In Middle' - we use...

Waveshare 19445 - Power Over Ethernet HAT (Type C) For Raspberry Pi 3B+/4B, 802.3af/at Power-Sourcing Equipment Required Features The PoE HAT (C) is a 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 3B+/4B. By using this small...

Unsure which PiKVM to choose? See our comparison chart Please note that USB-C displays are not supported. PiKVM V3 Pre-Assembled Edition After a successful Kickstarter campaign for the PiKVM HAT, we’re excited to offer a complete and...

Make the Raspberry Pi Pico the core of your new robotics project with the Kitronik Compact Robotics Board for Raspberry Pi Pico. This Compact Robotics Board enables the Raspberry Pi Pico (connected via pin header) to drive 4 motors (or 2 stepper motors)...

Waveshare 18899 - PCIe TO USB 3.2 Gen1 Adapter, Designed For Raspberry Pi Compute Module 4 IO Board, 4x High Speed USB Ports Features 4x USB 3.2 Gen1 ports, USB 3.0 / 2.0 / 1.1 compatible Flexible power supply options: powered from either PCIe 12V,...

XLR daughter card for IQaudio DAC Pro. 

Waveshare 20182 - ESP8266 WiFi Module For Raspberry Pi Pico, Supports TCP/UDP Protocol Features The Pico-ESP8266 is a WiFi expansion module designed for Raspberry Pi Pico, which can be controlled via UART AT command, and supports TCP/UDP communication...

Waveshare 21474 - Dual-Mode Bluetooth Module For Raspberry Pi Pico, SPP / BLE, Bluetooth 5.1 Wireless Features The Pico-BLE is a dual-mode Bluetooth 5.1 expansion module designed for Raspberry Pi Pico, which is controlled via UART AT commands, with SPP...

A vibrant, highly concentrated 4" (640 x 400 pixel) 7 colour electronic paper display for Raspberry Pi. New ePaper screens just keep getting better! We can't resist them with their delicious crispness, impressive low power credentials and enticing...

A meteorologically minded Raspberry Pi HAT designed to make hooking up weather sensors a breeze (or a squall, or a gale). Weather HAT is a tidy all-in-one solution for hooking up climate and environmental sensors to a Raspberry Pi. It has a bright 1.54"...

Waveshare 20472 - USB 3.2 Gen1 And Gigabit Ethernet HUB HAT For Raspberry Pi, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free This is a driver-free 3 ports USB 3.2 Gen1 hub HAT for Raspberry Pi, also with a Gigabit Ethernet port, provides more...

Waveshare 17075 - 2-Channel Isolated CAN FD Expansion HAT For Raspberry Pi, CAN FD Support, Multi Onboard Protection Circuits Features The 2-CH CAN FD HAT is a 2-Channel CAN bus expansion HAT designed for Raspberry Pi, supports CAN FD (CAN with...

A generous 2.0" (320 x 240) IPS LCD display for Raspberry Pi with lots of tasty baked in functionality. Raspberry Pi and accessories are NOT included. Display HAT Mini features a bright 18-bit capable 320x240 pixel display with vibrant colours and...

Pi4, ClusterHAT, FanSHIM, etc. NOT included. Keep the 3.3v rail alive between reboots. When rebooting a Raspberry Pi 4 the 3.3 volt rail is reset which causes problems for some HATs. 3v3 Sustain fits in between a Raspberry Pi and a HAT/pHAT and provides...

Waveshare 20410 - Ethernet To UART Converter For Raspberry Pi Pico, 10/100M Ethernet, Enabling Network Communication Through UARTSupports 2-CH Ethernet To UART Data Transparent Transmission Features Standard Raspberry Pi Pico header, supports...

Waveshare 19602 - Mini Base Board (B) Designed For Raspberry Pi Compute Module 4 Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products Powerful functions in a credit card sized body Standard CM4 Socket And Color-Coded...