A generous 2.0" (320 x 240) IPS LCD display for Raspberry Pi with lots of tasty baked in functionality. Raspberry Pi and accessories are NOT included. Display HAT Mini features a bright 18-bit capable 320x240 pixel display with vibrant colours and...

Pi4, ClusterHAT, FanSHIM, etc. NOT included. Keep the 3.3v rail alive between reboots. When rebooting a Raspberry Pi 4 the 3.3 volt rail is reset which causes problems for some HATs. 3v3 Sustain fits in between a Raspberry Pi and a HAT/pHAT and provides...

Waveshare 20410 - Ethernet To UART Converter For Raspberry Pi Pico, 10/100M Ethernet, Enabling Network Communication Through UARTSupports 2-CH Ethernet To UART Data Transparent Transmission Features Standard Raspberry Pi Pico header, supports...

Waveshare 19602 - Mini Base Board (B) Designed For Raspberry Pi Compute Module 4 Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products Powerful functions in a credit card sized body Standard CM4 Socket And Color-Coded...

Waveshare 17009 - 2.23inch OLED Display HAT For Raspberry Pi, 128×32 Pixels, SPI/I2C Interface This is an OLED display HAT for Raspberry Pi, 2.23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or...

The Raspberry Pi Build HAT combines the power of Raspberry Pi computing with LEGO® hands-on learning to enable a fun and creative learning experience for students, teachers and makers.The Raspberry Pi Build HAT is an add-on board...

The HiFi AMP Hat compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+ through the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering required. Easy to get more beautiful and fantastic sound by...

InnoMaker HiFi DAC Audio Hat for Raspberry Pi The HiFi DAC Hat compatible with Raspberry Pi Zero, Zero W, 3B, 3B+, Pi 4 with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get...

Waveshare 13890 - 1.3inch OLED Display HAT For Raspberry Pi, 128x64 Pixels, SPI/I2C Interface This is an OLED display HAT for Raspberry Pi, 1.3inch diagonal, 128x64 pixels, with embedded controller, communicating via SPI or I2C interface...

Give your Apple iPod Hi-Fi speaker system new life with the Airplay Audio Streaming Adapter. No wires needed, the adapter plugs right into the dock connector.  The adapter powers a Raspberry Pi Zero W that digitally sends the audio signal to a high...

Waveshare 17498 - 2-Channel Isolated RS232 Expansion HAT for Raspberry Pi, SC16IS752+SP3232 Solution, with Multi Onboard Protection Circuits This is a 2-channel isolated RS232 expansion HAT designed for Raspberry Pi, adopts the...

Waveshare 17912 - 2-Channel Isolated CAN Bus Expansion HAT For Raspberry Pi, MCP2515 + SN65HVD230 Dual Chips Solution, Multi Onboard Protection Circuits 2-Channel CAN HAT For Raspberry Pi 2-Channel Isolated CAN Bus Expansion, Multi...

This PoE+ HAT is NOT compatible with the newest Raspberry Pi 5 boards. Use this HAT to add PoE+ capability to your Raspberry Pi's Ethernet port. Compatible with Raspberry Pi 4 and Raspberry Pi 3B+. Power-sourcing equipment is required...

Unsure which PiKVM to choose? See our comparison chart Please note that USB-C displays are not supported. Unfortunately, we have to temporarily limit the purchase to two units per customer due to supply constraints. We hope to be able to offer more...

Transform your Raspberry Pi Pico into a electronic adventure playground packed with physical computing goodies including an LCD screen, motor drivers, a mini breadboard, and much more! Pico Explorer lets you play with circuits, build science...

A vibrant 1.14" IPS LCD screen for your Raspberry Pi Pico, with four useful buttons and a RGB LED! We've sourced a new LCD screen especially for our Pico Display Pack - it's a lovely, bright 18-bit capable 240x135 pixel IPS display and fits the Pico...

Built especially to showcase Raspberry Pi's low cost, feature-rich RP2040 chip, this board has VGA output, an SD card slot, digital I2S audio output, and more! Based on the reference design by Raspberry Pi our Pimoroni Pico VGA Demo Base is a great way...

Waveshare 14882 - RS485 CAN HAT for Raspberry Pi, Allows Stable Long-distance Communication The RS485 CAN HAT will enables your Pi to communicate with other devices stably in long-distance via RS485/CAN functions. Features Standard Raspberry Pi...

Feeling fancy? Why not add a Top pHAT to your Pi pHAT stack? The SparkFun Top pHAT for Raspberry Pi is intended to be at the top of a pHAT stack so you won't find any pins for stacking on top of this board, but that's ok, because you will want to...

The SparkFun Qwiic pHAT Extension for the Raspberry Pi 400 & Pi 500 provides you with a quick and easy solution to access all of the 400's GPIO, stack your favorite HAT right-side up, or connect a Qwiic-enabled device to the I2C bus (GND, 3.3V, SDA,...